openecu.org

by **Zakie@TIC** » Wed Jul 16, 2008 2:04 am

Hi, This BIN is off a 06 Auto Lancer, help with a XML file for tuning will be greatly appreciated.

Regards,

Zakie
Sri Lanka

by **acamus** » Wed Jul 16, 2008 9:57 am

here are the main maps.

by **Zakie@TIC** » Wed Jul 16, 2008 3:37 pm

Thanks Amacus, does anyone here have a complete XML for it, till then the rpm limiter will be very helpful.

by **acamus** » Wed Jul 16, 2008 8:52 pm

here are the limits included, I bet nobody has disassembled this ROM, can you specify (HP, Tq, engine type) for this machine?

by **Zakie@TIC** » Thu Jul 17, 2008 7:43 am

Thanks for the limits, its a 1600cc 16v SOHC with a 4G18 motor pushing around 120HP/6000RPM and torgue 135NM at 4500RPM. Your XML should be great for a stock NA setup, can we go a lil bit further to see if we could play around a lil bit with parameters like injector sizing, MAF/MAP edit etc.

by **acamus** » Fri Jul 18, 2008 5:17 am

4G18 does not have MAF sensor as far as i know.
Do you know the emission standard for it (EUROII\EUROIII\EUROIV)?

by **Zakie@TIC** » Fri Jul 18, 2008 10:24 am

Yes, its a Map sensor. Emission laws are still not strict in this part of the world, not sure for certain but at most it would be Euro 3 for the current models.

by **acamus** » Wed Jul 23, 2008 10:47 pm

The RPM in fuel maps has 13 elements, sorry for the mistake, I keep interchanging B for D. Now they make sense.

by **Zakie@TIC** » Fri Jul 25, 2008 1:07 pm

So do you need to re do the XML?

by **acamus** » Thu Jul 31, 2008 10:24 pm

Actually you needed to re-do the xml, here comes something more to your xml

by **Zakie@TIC** » Fri Aug 01, 2008 1:16 am

Looks great, will chk it out sometime, wonder if its safe to reflash the ecu with some changes to the map by selecting evo7/8 mode.

Regards,

by **Zakie@TIC** » Fri Aug 15, 2008 3:23 am

Hello Acamus, I'm in need of a def file for the attached map, in the process I have messed up the previous map (Lancer asian ver.) as its not loading all the parameters like the timing stuff.

Regards,

Zakie

by **acamus** » Fri Aug 15, 2008 9:59 am

Here it comes

by **Zakie@TIC** » Sat Aug 16, 2008 12:36 am

Thanks a Mil Amacus, I can read the fuel and Ignition maps with this xml, I'm getting some pics of the motor which I'll post shortly. This cars got a MAF sensor for sure and a 3 wire sensor which looks like Map sensor installed on the manifold. I'm trying to do a tune on a turbo build of a friend of mine who's unhappy with the current piggy back he's got

by **Zakie@TIC** » Sat Aug 16, 2008 6:58 am

Here are the pics of the 2004 Asian Cedia motor, its 2.0 lt NA with a after market turbo installed.

openecu.org

06 Lancer (South Asian Ver.)

06 Lancer (South Asian Ver.)

Who is online