2007 wrx reflash

[Aunti]

I'm trying to reflash my usdm 07 wrx to a stage 2 ots map i got. I'm using the open port 1.3 subaru tactrix cable and ecuflash 1.34 with updated defitions. So i connect the green connectors under steering wheel , run ecutek on pc connect tactrix cable turn key when prompted it reads the current ecu i have and save it to desktop as current.hex then i hit open new rom which is the ots map and it says :
UKNOWN ROM IMAGE
Ecuflash coud not recognize this rom using any of the current definitions. You can choose one of the following options:

Abort usint this rom image

Continue using this rom image with no defnition

Use wizard to create a new definition(not recommended!!!- for developers only)

if anyone could help me out thanks

[Freon]

You should ask the source where you got that ROM.

[Aunti]

thanks for your reply, I posted there as well just thought I would try here in case someone had a similar problem.

[Aunti]

nevermind fixed my problem you can delete this thread now

[Alex Maroto]

Please help me, I had the same trouble, with a 2004 WRX...

I´m able to download map, but software says the same you got!!!

Help please

Where do I can get updated definitions files?

[06STi]

If you guys have ecutek on the cars ecu you need to get a delta dash with easyecu and have the stock rom reflashed back on to the ecu.

Once you have the stock rom reflashed back onto the ecu you can then tune the car or reflash with openecu or romraider

ecutek has a lock that your getting.