openecu.org

Forums for ECU reverse engineering and modification

Skip to content

Evo1 ECU decoding / map locations

Announcements, dicussion about any topic that would have broad interest to the forum members

Moderator: Freon

Post a reply

Evo1 ECU decoding / map locations

Postby smurphy » Mon Oct 09, 2006 3:45 pm

Hello,
Can anyone help with the decoding of the mitsubishi EVO1 GSR EPROM ?. I have removed and socketed the EPROM from the ECU board and replaced with a socket for ease of removal. The data has been sucessfully read from the eprom (27c256) and i am viewing using hex workshop (eprom dump attached). However i am strugling to understand the code in terms of what is main code and ware are the data tables for fueling / ignition / boost solenoid duty / fuel pressure solenoid ECT. has anybody any info on the early import evos about how the ecu works and locations of data within the eprom as i am new to this and would like to try to change some parameters such as boost level and limits imposed by the factory software. There is little info on anything before the evo 4 many thanks to you all i am a newbie to this but do have an electronics / software background.
Simon. :?:
Attachments
Evo1 EA24b Original SW.BIN
Eprom dump evo1 gsr - cd9a
(32 KiB) Downloaded 701 times
smurphy
 
Posts: 2
Joined: Mon Oct 09, 2006 3:02 pm
Location: UK
Top

Postby Freon » Mon Oct 09, 2006 5:02 pm

Any idea on the CPU?
Freon
 
Posts: 700
Joined: Thu Nov 17, 2005 5:50 pm
Location: Indianapolis, IN
Top

Postby soondin » Mon Oct 09, 2006 6:38 pm

High Oct fuel : 0x716Eh
Low Oct fuel : 0x7232h

High Oct Ign : 0x756Bh
Low Oct Ign : 0x768Bh

Injector scale : 0x1AFDh
Rev Limits : 0x43A4h,0x43A5h : 7500rpm
Speed Limits :0x5258h : 184Km
soondin
 
Posts: 16
Joined: Sat Sep 16, 2006 10:24 pm
Location: South KOREA
Top

Postby YP » Mon Oct 09, 2006 10:22 pm

Freon wrote:Any idea on the CPU?


IMHO MH6111 - 6301 Custom edition. More detail on DSM forums.
User avatar
YP
 
Posts: 35
Joined: Sun Feb 05, 2006 7:41 am
Top

Postby smurphy » Tue Oct 10, 2006 12:59 pm

Hello And many thanks for the info so far,
The microprocessor in this ECU appears to be a MH6211
Does anyone know the location of the boost solenoid control table as i am keen to raise the upper boost limits on the ecu.
many thanks
simon.
smurphy
 
Posts: 2
Joined: Mon Oct 09, 2006 3:02 pm
Location: UK
Top

Postby peluca » Tue Oct 10, 2006 5:58 pm

Maybe this could help you.
http://users.wpi.edu/%7Ektarry/dsmtech/dsmromedit.html
peluca
 
Posts: 12
Joined: Mon Mar 27, 2006 10:55 am
Top

Postby radsdau » Wed Oct 11, 2006 3:31 pm

Wow! Nice find!
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm
Top

Postby defusionus » Mon Jan 08, 2007 5:23 am

Nice to see some other people with interests in this, but is useless unless we have someone that understands the processor and is able to disassemble the code.

At that point it's open house. I have been trying to get the DSM-ECU guys on "Yahoo Groups" to move to a forum based system, and share there knowledge openly, but there after several selfish people have taken there kind help, and tryed to resell it have locked up.

But there are a couple of people that are more than willing to help if you ask the right questions.

The "DSM-ECU" Yahoo group is a good resource for this.
defusionus
 
Posts: 4
Joined: Fri Sep 23, 2005 8:04 am
Location: Kingston, Jamaica W.I.
Top

Postby petbeemer » Fri Mar 16, 2007 11:20 am

www.forum.autofixed.co.uk your answer lies here :)
User avatar
petbeemer
 
Posts: 10
Joined: Sun Mar 12, 2006 4:52 am
Location: Sheffield
Top
Post a reply

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Time : 0.016s | 12 Queries | GZIP : Off