Has anyone tryed to read lancer X non turbo with openport 2.0 ?
Is it possible to communicate?
LancerX Na
19 posts
• Page 1 of 2 • 1, 2
LancerX Na
by peps_sti » Mon Feb 16, 2009 6:58 am
- peps_sti
- Posts: 10
- Joined: Thu Feb 23, 2006 2:34 pm
Re: LancerX Na
by spyder » Sat Feb 21, 2009 9:31 am
I have read out the 08 Lancer GTS (2.0 Mivec engine). Anyone got a xml file?
- Attachments
-
08_GTS_20MIVEC.hex- (1 MiB) Downloaded 1074 times
- spyder
- Posts: 17
- Joined: Thu Mar 15, 2007 9:07 pm
Re: LancerX Na
by Keiran » Sun Feb 22, 2009 1:57 am
spyder wrote:I have read out the 08 Lancer GTS (2.0 Mivec engine). Anyone got a xml file?
Gimme 2 days or so ..
- Keiran
- Posts: 154
- Joined: Sat Apr 29, 2006 9:09 pm
Re: LancerX Na
by spyder » Sun Feb 22, 2009 8:47 am
Found few maps, but not 100% sure.
Hight Octane Timing Map - 5364b (13x20)
Low Octane Timing Map - 53757 (13x20)
RPM - 5b2bc
Load - 5b286
MIVEC Intake #1 - 59995 (10x12)
MIVEC Intake #2 - 59a79 (10x12)
MIVEC Exhaust #1 -59b5d (10x12)
MIVEC Exhaust #2 - 59c41 (10x12)
Hight Octane Fuel Map - 53027
Low Octane Fuel Map - 531a3
Open Loop Low Octane #1 - 5334c
Open Loop High Octane #1 - 54904
Open Loop Low Octane #2 - 53360
Open Loop High Octane #2 - 54918
(updated on March 5, 09)
The maps in the rom file looks like the EVOs but in smaller size.
Hight Octane Timing Map - 5364b (13x20)
Low Octane Timing Map - 53757 (13x20)
RPM - 5b2bc
Load - 5b286
MIVEC Intake #1 - 59995 (10x12)
MIVEC Intake #2 - 59a79 (10x12)
MIVEC Exhaust #1 -59b5d (10x12)
MIVEC Exhaust #2 - 59c41 (10x12)
Hight Octane Fuel Map - 53027
Low Octane Fuel Map - 531a3
Open Loop Low Octane #1 - 5334c
Open Loop High Octane #1 - 54904
Open Loop Low Octane #2 - 53360
Open Loop High Octane #2 - 54918
(updated on March 5, 09)
The maps in the rom file looks like the EVOs but in smaller size.
Last edited by spyder on Thu Mar 05, 2009 12:44 am, edited 1 time in total.
- spyder
- Posts: 17
- Joined: Thu Mar 15, 2007 9:07 pm
Re: LancerX Na
by AlGontsov » Tue Feb 24, 2009 10:48 pm
No, I think that mivec's are at the another location.
Last edited by AlGontsov on Mon Mar 02, 2009 6:01 am, edited 1 time in total.
- AlGontsov
- Posts: 35
- Joined: Sun May 18, 2008 5:47 am
Re: LancerX Na
by spyder » Wed Feb 25, 2009 4:44 pm
Got another different ROM file from a 08 base model of the Lancer. The fuel and timing tables are at the same location but the Rev Limiter and Speed Limiter are not. Anyone have a xml file?
- Attachments
-
- 08_DE_20MIVEC.hex
- (1 MiB) Downloaded 970 times
- spyder
- Posts: 17
- Joined: Thu Mar 15, 2007 9:07 pm
Re: LancerX Na
by peps_sti » Thu Feb 26, 2009 1:55 pm
!
Last edited by peps_sti on Mon Mar 02, 2009 6:13 am, edited 1 time in total.
- peps_sti
- Posts: 10
- Joined: Thu Feb 23, 2006 2:34 pm
Re: LancerX Na
by AlGontsov » Thu Feb 26, 2009 10:28 pm
Hmm... I think that all ignition maps must be the same dimension A x B
- AlGontsov
- Posts: 35
- Joined: Sun May 18, 2008 5:47 am
Re: LancerX Na
by chango de naranjito » Wed Apr 29, 2009 6:32 pm
spyder wrote:Found few maps, but not 100% sure.
Hight Octane Timing Map - 5364b (13x20)
Low Octane Timing Map - 53757 (13x20)
RPM - 5b2bc
Load - 5b286
MIVEC Intake #1 - 59995 (10x12)
MIVEC Intake #2 - 59a79 (10x12)
MIVEC Exhaust #1 -59b5d (10x12)
MIVEC Exhaust #2 - 59c41 (10x12)
Hight Octane Fuel Map - 53027
Low Octane Fuel Map - 531a3
Open Loop Low Octane #1 - 5334c
Open Loop High Octane #1 - 54904
Open Loop Low Octane #2 - 53360
Open Loop High Octane #2 - 54918
(updated on March 5, 09)
The maps in the rom file looks like the EVOs but in smaller size.
I have a lancer gts did you find somthing to tune my car? here in Puerto Rico are like 50,000 lancers. And half of them always ask for this...
- chango de naranjito
- Posts: 4
- Joined: Thu Aug 03, 2006 3:25 pm
- Location: Puerto Rico
Re: LancerX Na
by AIK » Wed May 13, 2009 11:49 am
AlGontsov
I see, that Ignition maps are 13*20, fuel maps are 13*14. But i see only one line address for LOAD where it changed 0-100, and i see many line addreses for LOAD where it changed 0-60. Is it possible, that fuel maps has 0-60 LOAD, or may be timing load address = fuel load address?
I see, that Ignition maps are 13*20, fuel maps are 13*14. But i see only one line address for LOAD where it changed 0-100, and i see many line addreses for LOAD where it changed 0-60. Is it possible, that fuel maps has 0-60 LOAD, or may be timing load address = fuel load address?
- Attachments
-
- XL_EDM_2.4_var_51930007.hex
- (1 MiB) Downloaded 1017 times
-
- XLbase.xml
- (11.23 KiB) Downloaded 1180 times
-
- 51930007.xml
- (2.45 KiB) Downloaded 1187 times
- AIK
- Posts: 19
- Joined: Tue Sep 16, 2008 6:07 am
- Location: Moscow, Russia
Re: LancerX Na
by Mitsiman » Tue Jun 16, 2009 11:11 pm
Any updates with getting a definition file completed for these vehicles. Very popular vehicle in Australia and desperlatly need some definition files
- Mitsiman
- Posts: 49
- Joined: Tue Aug 12, 2008 4:06 am
Re: LancerX Na
by chango de naranjito » Fri Jul 17, 2009 4:24 pm
did anyone tried to reflash a lancer yet?
- chango de naranjito
- Posts: 4
- Joined: Thu Aug 03, 2006 3:25 pm
- Location: Puerto Rico
19 posts
• Page 1 of 2 • 1, 2
Return to Mitsubishi (all models)
Who is online
Users browsing this forum: No registered users and 0 guests