DW 850cc Injector Scaling?

[thejean]

Anyone know what the injector scaling is for the Deutchwerks 850 cc/min injectors?

Thanks, JC

[WerdJack]

bump.............

[WerdJack]

how about latency too....

[WerdJack]

same injectors as above used

Code: Select all

6.5     9.0     11.5      14.0    16.5

Code: Select all

4.02    2.14   1.42     1.14     0.60

My injector flow was set to 600 cc and I got 14.7-15.1.........

at injector flow 830cc was 19.1........

got info from.....
http://forums.nasioc.com/forums/showthr ... +injectors

still testing........

I have been logging in the UTEC...... what values do you want to examine using enginuity and is there a place to find more info on how to analysis logs....

[WerdJack]

please disregard some of the above info.....I did not have my UTEC Parameters injector scaler values set to the same number...in my case 650/650 versus 650/420..........

Now I have my ecu reflashed to 800 cc injector scaling with the UTEC at 800/800 with the following latency values with much better results..

Code:
6.5 9.0 11.5 14.0 16.5

Code:
4.02 2.14 1.42 1.14 0.60

updated 5-28-07