07 STi

Announcements, dicussion about any topic that would have broad interest to the forum members

Moderator: Freon

Postby evoX » Sat Mar 10, 2007 6:19 pm

Keener2.5 wrote:I just connected the white ones down by the fuse box and the green ones on the passenger side near the door and the green test mode connectors.

near the door there are 2 green connectors, but they are already connected by factory !
also which are the white connectors near the fuse box? I have only one blue connector there, which fits the jumper which came with the Tactrix OpenPort interface.

Can you post some pictures with the connectors, I almost dissasembled the entire car and tried all the connectors to connect or disconnect. :(
evoX
 
Posts: 36
Joined: Tue Jan 02, 2007 3:45 pm

Postby Keener2.5 » Sat Mar 10, 2007 8:54 pm

evoX wrote:
Keener2.5 wrote:I just connected the white ones down by the fuse box and the green ones on the passenger side near the door and the green test mode connectors.

near the door there are 2 green connectors, but they are already connected by factory !
also which are the white connectors near the fuse box? I have only one blue connector there, which fits the jumper which came with the Tactrix OpenPort interface.

Can you post some pictures with the connectors, I almost dissasembled the entire car and tried all the connectors to connect or disconnect. :(


Did you look under the inside fusebox near the floor.
Keener2.5
 
Posts: 32
Joined: Tue Oct 10, 2006 7:41 pm

Postby evoX » Sun Mar 11, 2007 11:07 am

I found two white connectors near the driver's door down the floor, but that's not near the fuse box, anyway I have connected them but still not able to read the ROM :evil:
evoX
 
Posts: 36
Joined: Tue Jan 02, 2007 3:45 pm

Postby Keener2.5 » Sun Mar 11, 2007 7:37 pm

evoX wrote:I found two white connectors near the driver's door down the floor, but that's not near the fuse box, anyway I have connected them but still not able to read the ROM :evil:

whooops. I wonder whats going on...
Keener2.5
 
Posts: 32
Joined: Tue Oct 10, 2006 7:41 pm

Postby evoX » Mon Mar 12, 2007 12:15 pm

The car is EDM STi '07 Limited 290hp, I was able to read and write the '06 model without any problem, but with MY07 I really don't know what to do anymore.
evoX
 
Posts: 36
Joined: Tue Jan 02, 2007 3:45 pm

Postby evoX » Mon Mar 12, 2007 5:05 pm

I have installed ecuflash 1.30 and now I was able to read the rom just with the green connectors connected :D
But now I have another problem the map is not recognized by ecuflash or enginuity, so I have posted the rom to the enginuity forum.
evoX
 
Posts: 36
Joined: Tue Jan 02, 2007 3:45 pm

Postby Keener2.5 » Fri Mar 23, 2007 11:13 pm

I'm throwing on the APS 3.5 TBE tomorrow and going to start playing with the maps with enginuity! w00t! Going to see if I can copy the tables from the subaru reflash for the 07 limited to get rid of my stupid hesistation/surge thing.
Keener2.5
 
Posts: 32
Joined: Tue Oct 10, 2006 7:41 pm

Postby evoX » Sat Mar 24, 2007 11:07 am

Hi,
If you get rid of it, please let me know what you did :roll:
evoX
 
Posts: 36
Joined: Tue Jan 02, 2007 3:45 pm

Postby Keener2.5 » Sat Mar 24, 2007 7:33 pm

evoX wrote:Hi,
If you get rid of it, please let me know what you did :roll:


Why roll eyes? I didn't have a chance to play with it, ran out of time. However the APS is nice. :) Only one small boost spike.
Keener2.5
 
Posts: 32
Joined: Tue Oct 10, 2006 7:41 pm

Postby evoX » Mon Mar 26, 2007 9:56 am

3,5" I think it's too big for a stock turbo
evoX
 
Posts: 36
Joined: Tue Jan 02, 2007 3:45 pm

Postby Keener2.5 » Tue Mar 27, 2007 7:55 pm

evoX wrote:3,5" I think it's too big for a stock turbo

It's a bit big, but its not bad. Its going to make some damn good top end power once this thing is tuned right.
Keener2.5
 
Posts: 32
Joined: Tue Oct 10, 2006 7:41 pm

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 0 guests