openecu.org

by **red^shark** » Tue Mar 27, 2007 4:32 am

There are pdf manuals buried in the download section for the operation and programming of the h8 series microprocessers.

Based on what I have read here.. Colby will probably have it done soon.
You could try Dsmlink or buy an evo 8 ecu off of ebay

Personally, I will give Colby a couple more weeks before I start to play with the evo 8 ecu I bought off ebay to replace my h8 ecu with.

Red

by **gteclass** » Tue Mar 27, 2007 5:25 am

andy.uk wrote:If somebody can explain how to read a file dump directly from the H8 then I have to cars to do it with. I also have many bits of tuning equipment like Eprom Programmer, BDM programmer ect.
Just let me know and I will help.

Unfortunately im pretty sure the original dump requires you to desolder the processor from the ECU board to read it with your programmer making the ECU useless... unless you want to go through the trouble of resoldering it to test it out with the cable. An extra ECU would really be what you need. Will any of your programmers read from the Hitachi H8 chips?

What might be easier is if colby would post a copy of an H8 dump, there is one in the download section for an acura legend but im not sure that is what we need. And for that matter, is the ECUFlash source available for download? Or is there an openport SDK? The download section is huge and i have dl'd the three PDFs on the H8 but havent found any information on how the ECUFlash GUI interfaces with the cable.

by **S54fan** » Tue Mar 27, 2007 6:26 am

I loaded one of the ones posted on here into IDA. You need to load it at offset 0x10000, and then reset vector is the address pointed to from the first four bytes. There were two fuel and timing tables that popped out from searching for the headers like the SH2 Evo 7-9 models - 03 0x then two addresses, then the column length then the map data.

by **andy.uk** » Fri Apr 06, 2007 5:01 am

Colby, Is there any chance of a beta version release with the new
H8 Kernal???
It might keep us from chewing at the bit to hard.
It might be an idea to do this but tell people to use it at
there own risk.
If you want to send me a version email
it to email.andy@blueyonder.co.uk

by **Evodoc** » Fri Apr 06, 2007 8:18 pm

You guys ever thought of using tuner pro to view the maps in 3D, it is actually quite nice. I have actually been viewing evo 6-9 fuel and ignition maps in 3D.

by **Travis** » Fri Apr 06, 2007 10:00 pm

Evodoc wrote:You guys ever thought of using tuner pro to view the maps in 3D, it is actually quite nice. I have actually been viewing evo 6-9 fuel and ignition maps in 3D.

We cant even read our ECU's; go away.

by **Evodoc** » Fri Apr 06, 2007 10:32 pm

Travis wrote:
Evodoc wrote:You guys ever thought of using tuner pro to view the maps in 3D, it is actually quite nice. I have actually been viewing evo 6-9 fuel and ignition maps in 3D.

We cant even read our ECU's; go away.

uhhhhhh... now Travis why you gotta be like that. Cheer up man Colby will soon be finished.

by **Travis** » Fri Apr 06, 2007 10:36 pm

Evodoc wrote:
Travis wrote:
Evodoc wrote:You guys ever thought of using tuner pro to view the maps in 3D, it is actually quite nice. I have actually been viewing evo 6-9 fuel and ignition maps in 3D.

We cant even read our ECU's; go away.

uhhhhhh... now Travis why you gotta be like that. Cheer up man Colby will soon be finished.

yeah I know, my bad. it's just you talking about reading maps in 3d is like pouring salt in an open wound.

by **andy.uk** » Thu Apr 12, 2007 9:58 am

Colby mate, Can we have an update on this software???
This was promised 2 weeks ago!
If you want some dosh then just ask and I will send you
some.
I have tons of EVO6 lined up for remaps and dont
mind sharing the wealth at all.
Please just say where you at with it

by **gteclass** » Thu Apr 12, 2007 4:25 pm

the unofficial, third party word is he is almost done with it. I have noticed that he doesnt stay on top of this board probably because he is a busy man. I really do think he should at the very least give us a place we can send donations for all the work he is doing. When he does finish i will be extremely grateful.

by **andy.uk** » Fri Apr 20, 2007 9:55 pm

At the moment now I feel like a Mushroom!

Fed bullshit and kept in the dark :!:

I don't think this H8 kernel will ever come out

by **Travis** » Fri Apr 20, 2007 10:01 pm

andy.uk wrote:At the moment now I feel like a Mushroom!

Fed bullshit and kept in the dark

I don't think this H8 kernel will ever come out

ROFL!

by **red^shark** » Sat Apr 21, 2007 7:14 am

You are what you eat :twisted:

I bought an evo 8 ecu off ebay for if/when i got tired of waiting

Red

by **OrlandoGT** » Wed Apr 25, 2007 7:38 am

Has anyone PM'd or spoken to Colby directly? I noticed that he was on the forums yesterday, but didn't address this thread...

by **thefranchise** » Thu Apr 26, 2007 8:32 pm

bump to top.

any update colby? last i talked to u u told me september of 2006 it would be ready. is this project dead in the water or just on hold?

openecu.org

EVO5/6 MH7201F - MH7202F read/flash tool - it works.

Who is online