Page 1 of 2

Definition File needed for Australian 4G94 Lancer

PostPosted: Tue May 05, 2009 2:37 am
by Mitsiman
Definition file from Mitsubishi Lancer with the 4G94 Lancer

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Tue May 05, 2009 9:19 am
by acamus
ROMID = 99730001
ECU Family = EM9973
SCC = E57C

Does it have MIVEC head?

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Tue May 05, 2009 10:52 am
by acamus
Here it comes

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Tue May 05, 2009 5:00 pm
by Mitsiman
Thanks no this is for the baseline 4G94 SOHC 16v motor. Same as the ES Lancer in the USA 2003 - 2007 model.

I will give it a go thanks again

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Wed May 06, 2009 7:03 pm
by Mitsiman
I have another 4G94 lancer ROm I flashed, which needs a new definition file.

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Wed May 06, 2009 11:49 pm
by acamus
ROMID = 98490000
ECU Family = JM9849
SCC = E57C

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Thu May 07, 2009 12:10 am
by Mitsiman
Acamas I am going to have to put you on my payroll at this rate :)

Let me know how you go with teh definition file.

Also secondly, for those that may know, many of these Mitsubishi vehcles are not running a knock sensor from factory. If we were to wire it in and somehow find the pin on the ECU, would the software automatically be able to utilise it or would we have to write a specific file to enable it?

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Thu May 07, 2009 12:12 am
by acamus
Here it comes

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Thu May 07, 2009 12:14 am
by acamus
There is more to knock than wire it in, unfortunately.
Where do I withdraw paycheck money? :)

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Sun Jun 07, 2009 5:17 pm
by Mitsiman
I have another model 4G94 needing a definition file. Thanks again to those who are helping.

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Mon Jun 08, 2009 11:11 am
by acamus
You can use 2005 model definition just change the xml header and save as 94950001.xml

ROMID = 94950001
SCC = E57C
ECU Family = JM9495

Code: Select all
   
<romid>
      <xmlid>94950001</xmlid>
      <internalidaddress>f52</internalidaddress>
      <internalidhex>94950001</internalidhex>
      <make>Mitsubishi</make>
      <market>ADM</market>
      <model>Lancer</model>
      <submodel>4G94</submodel>
      <transmission>Manual</transmission>
      <year>2004</year>
      <flashmethod>mitsukernel</flashmethod>
      <memmodel>SH7052</memmodel>
   </romid>

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Mon Jun 08, 2009 10:46 pm
by Mitsiman
Thanks worked a charm.

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Thu Jul 02, 2009 11:51 pm
by Mitsiman
I have another variation of the 4G94 this time an Auto model.

Would someone have a look at this one for me please thanks

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Fri Jul 03, 2009 12:03 pm
by acamus
Same as above, save as 84970001.xml
Code: Select all
   <romid>
      <xmlid>84970001</xmlid>
      <internalidaddress>f52</internalidaddress>
      <internalidhex>84970001</internalidhex>
      <make>Mitsubishi</make>
      <market>ADM</market>
      <model>Lancer</model>
      <submodel>4G94</submodel>
      <transmission>Auto</transmission>
      <year>2006</year>
      <flashmethod>mitsukernel</flashmethod>
      <memmodel>SH7055</memmodel>
   </romid>

Re: Definition File needed for Australian 4G94 Lancer

PostPosted: Sun Apr 11, 2010 7:20 am
by HsamehH
hi acamus, I have this one too from manual 4g94 lancer but ecuflash can't open it with this xml's :(