LancerX Na
Posted: Mon Feb 16, 2009 6:58 amHas anyone tryed to read lancer X non turbo with openport 2.0 ?
Is it possible to communicate?
Is it possible to communicate?
openecu.org
Forums for ECU reverse engineering and modification
http://forums.openecu.org/
LancerX Na
Page 1 of 2
Posted: Mon Feb 16, 2009 6:58 amRe: LancerX Na
Posted: Thu Feb 19, 2009 7:27 amyes, it's possible.
Re: LancerX Na
Posted: Sat Feb 21, 2009 9:31 amI have read out the 08 Lancer GTS (2.0 Mivec engine). Anyone got a xml file?
Re: LancerX Na
Posted: Sun Feb 22, 2009 1:57 amspyder wrote:I have read out the 08 Lancer GTS (2.0 Mivec engine). Anyone got a xml file?
Gimme 2 days or so ..
Re: LancerX Na
Posted: Sun Feb 22, 2009 8:47 amFound few maps, but not 100% sure.
Hight Octane Timing Map - 5364b (13x20)
Low Octane Timing Map - 53757 (13x20)
RPM - 5b2bc
Load - 5b286
MIVEC Intake #1 - 59995 (10x12)
MIVEC Intake #2 - 59a79 (10x12)
MIVEC Exhaust #1 -59b5d (10x12)
MIVEC Exhaust #2 - 59c41 (10x12)
Hight Octane Fuel Map - 53027
Low Octane Fuel Map - 531a3
Open Loop Low Octane #1 - 5334c
Open Loop High Octane #1 - 54904
Open Loop Low Octane #2 - 53360
Open Loop High Octane #2 - 54918
(updated on March 5, 09)
The maps in the rom file looks like the EVOs but in smaller size.
Hight Octane Timing Map - 5364b (13x20)
Low Octane Timing Map - 53757 (13x20)
RPM - 5b2bc
Load - 5b286
MIVEC Intake #1 - 59995 (10x12)
MIVEC Intake #2 - 59a79 (10x12)
MIVEC Exhaust #1 -59b5d (10x12)
MIVEC Exhaust #2 - 59c41 (10x12)
Hight Octane Fuel Map - 53027
Low Octane Fuel Map - 531a3
Open Loop Low Octane #1 - 5334c
Open Loop High Octane #1 - 54904
Open Loop Low Octane #2 - 53360
Open Loop High Octane #2 - 54918
(updated on March 5, 09)
The maps in the rom file looks like the EVOs but in smaller size.
Re: LancerX Na
Posted: Tue Feb 24, 2009 10:48 pmNo, I think that mivec's are at the another location.
Re: LancerX Na
Posted: Wed Feb 25, 2009 4:44 pmGot another different ROM file from a 08 base model of the Lancer. The fuel and timing tables are at the same location but the Rev Limiter and Speed Limiter are not. Anyone have a xml file?
Re: LancerX Na
Posted: Thu Feb 26, 2009 1:55 pm!
Re: LancerX Na
Posted: Thu Feb 26, 2009 10:28 pmHmm... I think that all ignition maps must be the same dimension A x B
Re: LancerX Na
Posted: Wed Apr 29, 2009 6:32 pmspyder wrote:Found few maps, but not 100% sure.
Hight Octane Timing Map - 5364b (13x20)
Low Octane Timing Map - 53757 (13x20)
RPM - 5b2bc
Load - 5b286
MIVEC Intake #1 - 59995 (10x12)
MIVEC Intake #2 - 59a79 (10x12)
MIVEC Exhaust #1 -59b5d (10x12)
MIVEC Exhaust #2 - 59c41 (10x12)
Hight Octane Fuel Map - 53027
Low Octane Fuel Map - 531a3
Open Loop Low Octane #1 - 5334c
Open Loop High Octane #1 - 54904
Open Loop Low Octane #2 - 53360
Open Loop High Octane #2 - 54918
(updated on March 5, 09)
The maps in the rom file looks like the EVOs but in smaller size.
I have a lancer gts did you find somthing to tune my car? here in Puerto Rico are like 50,000 lancers. And half of them always ask for this...
Re: LancerX Na
Posted: Wed May 13, 2009 11:49 amAlGontsov
I see, that Ignition maps are 13*20, fuel maps are 13*14. But i see only one line address for LOAD where it changed 0-100, and i see many line addreses for LOAD where it changed 0-60. Is it possible, that fuel maps has 0-60 LOAD, or may be timing load address = fuel load address?
I see, that Ignition maps are 13*20, fuel maps are 13*14. But i see only one line address for LOAD where it changed 0-100, and i see many line addreses for LOAD where it changed 0-60. Is it possible, that fuel maps has 0-60 LOAD, or may be timing load address = fuel load address?
Re: LancerX Na
Posted: Tue Jun 16, 2009 11:11 pmAny updates with getting a definition file completed for these vehicles. Very popular vehicle in Australia and desperlatly need some definition files
Re: LancerX Na
Posted: Sun Jul 12, 2009 8:59 pmhas anyone used the AlGontsov definitions ???
Re: LancerX Na
Posted: Fri Jul 17, 2009 4:24 pmdid anyone tried to reflash a lancer yet?
Re: LancerX Na
Posted: Sun Jul 19, 2009 9:19 amAny news?