openecu.org

Posted: **Wed Sep 10, 2008 1:39 am**

Still having major problems communication with my ECU in my EVO7.
I can communicate through a diagnostic tool but not through Openport 1.3 cable. It worked fine before I removed the Battery cable with computer connected to OBD. After that nothing is working with Openport cable.

I recived a new cable today but still no success.
One thing I noticed is that the tarmac led is flashing and when the system was working all the 3 leds was flashing when Openport cable was connected.

Any ideas?

Regards Lars

Posted: **Sun Sep 14, 2008 12:30 am**

Is the cable from Tactrix, or limitless?

Posted: **Sun Sep 14, 2008 6:21 am**

The cable is from limitless.

/ lars

Posted: **Wed Oct 08, 2008 5:33 am**

With some guidance from Tactrix support my Openport problem is now solved. I removed my previous ECUflash version and installed the latest 1.38. Everything is working fine.

Thank´s for your help Amanda at Tactrix.

/ Lars

Posted: **Fri Oct 10, 2008 2:52 pm**

Glad you got that sorted Lars, sorry not have helped any.

MB

openecu.org

Still having problems connecting through OpenPort 1.3

Still having problems connecting through OpenPort 1.3

problem solved!