openecu.org

Hi,
I am trying to read the ROM on a 2006 STI 2.5L but i cant. i opened the Passenger Kick Panel and found the Green Plug already connected and tried to do it with the plug conected and disconnected but every time i get the following message:

[17:38:29.737] Version 1.38.2080
[17:38:29.737] 11 memory models read.
[17:38:29.784] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[17:38:32.857] 264 ROM metadata models scanned.
[17:38:32.857] checksum module "subarudbw" loaded.
[17:38:32.857] flashing tool "wrx02" loaded.
[17:38:32.857] flashing tool "wrx04" loaded.
[17:38:32.857] flashing tool "sti04" loaded.
[17:38:32.857] flashing tool "sti05" loaded.
[17:38:32.857] flashing tool "mitsukernel" loaded.
[17:38:32.857] flashing tool "mitsukernelocp" loaded.
[17:38:32.857] flashing tool "shbootmode" loaded.
[17:38:32.904] flashing tool "shaudmode" loaded.
[17:38:32.904] flashing tool "subarucan" loaded.
[17:38:48.936] Using interface OpenPort 1.3 Universal TX25IvK69687f6c9235423d5075f5e3181d874ea179212ec
[17:38:51.339] kernel get version
[17:38:51.733] SSM2 init
[17:38:51.990] SSM2 ECU ID is 4D 42 59 40 06
[17:38:52.086] Requesting Seed...
[17:38:52.138] Sending Key...
[17:38:52.823] interface close
[17:38:52.823] interface close
[17:39:42.625] Using interface OpenPort 1.3 Universal TX25IvK69687f6c9235423d5075f5e3181d874ea179212ec
[17:40:08.467] kernel get version
[17:40:08.857] SSM2 init
[17:40:09.122] SSM2 ECU ID is 4D 42 59 40 06
[17:40:09.216] Requesting Seed...
[17:40:09.263] Sending Key...
[17:40:09.902] interface close
[17:40:09.902] interface close

[17:43:26.269] Using interface OpenPort 1.3 Universal TX25IvK69687f6c9235423d5075f5e3181d874ea179212ec
[17:44:17.786] kernel get version
[17:44:18.176] SSM2 init
[17:44:18.441] SSM2 ECU ID is 4D 42 59 40 06
[17:44:18.519] Requesting Seed...
[17:44:18.582] Sending Key...
[17:44:19.221] interface close
[17:44:19.221] interface close


Please help.

Anyone please

Is the ECU locked?

i guess you have ppp. ppp uses the same lock with ecutek and map is also made by ecutek.

its a bone stock EU Car. please help

Anyone Please.

sms tuner wrote:i opened the Passenger Kick Panel and found the Green Plug already connected ...

Then you need to find the second pair of green connectors, maybe below driver's side dashboard.

Thank you for your replay. Can someone elaborate on the Connector things. like what is the color of the connector and the location, and if possible a proper procedure that explains what to do exactly.

Regards,

Subaru has 2 green connectors, 1 of them already together, the 2nd one you should find under the plastic cover near the doors (check both passenger and driver), in the passenger feets under the carpet, under the dashboard... then join the 2nd pair, and don't forget to press "read" in the 1st seconds after turning "on" of the ignition, otherwise reading will be failed.

Thank you Sir. That was really helpful.

Chears,