request for EU Impreza 1.6 TS rommetadata

request for EU Impreza 1.6 TS rommetadata

Postby ravenhil » Sun Jul 01, 2007 3:35 am

Plenty of euro 1.6 L Impreza TS in my country. The guys here would love something that can read and write their .hex files!
ravenhil
 
Posts: 46
Joined: Fri May 04, 2007 8:09 pm

Postby ravenhil » Tue Jul 03, 2007 9:07 am

tried to pull a rom from a MY06 1.6L TS and I got the following log

[14:50:48.859] Version 1.30.1095
[14:50:48.859] 8 memory models read.
[14:50:51.703] ROM metadata models A8DH200Y.xml is invalid.
[14:50:51.734] 146 ROM metadata models read.
[14:50:51.734] checksum module "subarudbw" loaded.
[14:50:51.734] flashing tool "wrx02" loaded.
[14:50:51.750] flashing tool "wrx04" loaded.
[14:50:51.750] flashing tool "sti04" loaded.
[14:50:51.750] flashing tool "sti05" loaded.
[14:50:51.750] flashing tool "mitsukernel" loaded.
[14:50:51.750] flashing tool "mitsukernelocp" loaded.
[14:50:51.750] flashing tool "mitsubootloader" loaded.
[14:51:00.703] SSM2 init
[14:51:00.875] [FF] A1 10 06 43 46 10 30 05 F3 EA AB 89 A2 0E 00 A8
00 00 00 60 CE 54 FC B8 01 00 00 E0 00 00 00 00
00 DC 00 00 71 1F 00 00 00 00 00 00 00 00 00 E0
00 00 00 00 00 00 00 00
[14:51:00.875] SSM2 ECU ID is 43 46 10 30 05
[14:51:00.875] SSM2 cmd_0x81
[14:51:17.578] denso02_bootloader_cmd_start
[14:51:18.968] denso02_bootloader_cmd_start
[14:51:20.359] denso02_bootloader_cmd_start
[14:51:21.750] denso02_bootloader_cmd_start
[14:51:23.140] denso02_bootloader_cmd_start
[14:51:23.750] kernel get version

Needless to say, it didn't work.
ravenhil
 
Posts: 46
Joined: Fri May 04, 2007 8:09 pm

Postby salex » Tue Jul 03, 2007 10:24 pm

I've tried that, too, with very similar results.
It just doesn't work with the current version of Ecuflash. :cry:
salex
 
Posts: 72
Joined: Wed Jun 21, 2006 2:30 pm
Location: Greece

Postby ravenhil » Sat Jul 28, 2007 11:21 am

I do not know what it takes to get it to work with TS. I believe it is possible since the datalog is already possible. I don't have the time to study programming just to figure this out. I am quite prepared to pay to get this done though.
ravenhil
 
Posts: 46
Joined: Fri May 04, 2007 8:09 pm

Postby ravenhil » Mon Feb 25, 2008 2:40 am

Still no support?
ravenhil
 
Posts: 46
Joined: Fri May 04, 2007 8:09 pm


Return to Subaru (all models)

Who is online

Users browsing this forum: No registered users and 1 guest