openecu.org

2002 wrx modded stock injectors flow tested at 840 cc 2 years ago.

I have reflashed my ecu w/ the following values...

Injector flow 600 cc..........at 800 and 700 were lean, close to 14.7

Latency Values Based off formula from
(((NewFlow/OldFlow) -1) / 2) + 1 = 1.44

http://forums.nasioc.com/forums/showthr ... +injectors

Code: Select all

6.5     9.0     11.5      14.0    16.5


Code: Select all

4.02    2.14   1.42     1.14     0.60

What direction do I need to go?

Damn how do I down load logs in csv. or period?

Basically, my stft is pegged t 21.00 at 4000 rpm in neutral and while cruising at 25.00 ......+- 3 at idle

let me try this one more time....

OK so you have + stft values while cruising do I adjust my scaling or latency.

anybody?

Disregard info above....when using UTEC make sure your scaling values match for example 650/650 versus 650/420 mine did not above....