Where is the green test connector?
Posted: Mon Dec 04, 2006 9:12 amI can't seem to find the green test connector on my USDM 06 STI? Please Help!!
openecu.org
Forums for ECU reverse engineering and modification
http://forums.openecu.org/
Where is the green test connector?
Page 1 of 1
Posted: Mon Dec 04, 2006 9:12 amPosted: Mon Dec 04, 2006 4:24 pmIt is under the dash, near the steering column. The two green connectors, you just snap them together It is there somewhere. They shouldn't be hidden.
Posted: Mon Dec 04, 2006 8:01 pmI don't think those green plugs near the steering column are the test connectors for the DBW 06 STI. Because I they came stock preplugged. When i unplug them and plug it back, I don't hear any fan cycling or noise.
Still need help!!! thanks
Still need help!!! thanks
Posted: Tue Dec 05, 2006 9:54 amthere is probably another set on the passenger side that is unplugged then-the standard is to have the driver set unplugged, pass set plugged, but some cars are flipped. check that, the panel to the right of the glovebox should come off relatively easily and i think that is where it is hidden.
Posted: Thu Dec 07, 2006 1:04 pmThank you..found it..Everything work as expected.
Posted: Wed May 23, 2007 3:02 pm
You are a good boy gregsachs.ThanksPosted: Tue Jul 03, 2007 8:54 amhey guys i having the same problem i can log my car with enginuity but when i try to read my rom with ecuflash it comes up rear error review log for details or something like that. i do not have any connector hook up so whats the deal here, i know i'm doing something wrong? thanks in advance guys!!!
Posted: Tue Jul 03, 2007 9:03 amYou have to connect the green test mode connector just as discussed above.