AUS Liberty 05/06 GT Auto flash download problem

[ziad]

hia,

sorry i think it is a noob question but i am having difficulty reading the rom from our 2005/6 2L AUS liberty GT auto. The only green connector that i could find which is in the right side of the driver foot panel is already connected. then i tired downloading via ecuflash 1.3 and 1.33 and both times the following error happens on ecuflash

[17:32:10.109] Version 1.33.1426
[17:32:10.125] 11 memory models read.
[17:32:10.125] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[17:32:10.406] 219 ROM metadata models scanned.
[17:32:10.406] checksum module "subarudbw" loaded.
[17:32:10.406] flashing tool "wrx02" loaded.
[17:32:10.406] flashing tool "wrx04" loaded.
[17:32:10.406] flashing tool "sti04" loaded.
[17:32:10.406] flashing tool "sti05" loaded.
[17:32:10.406] flashing tool "mitsukernel" loaded.
[17:32:10.406] flashing tool "mitsukernelocp" loaded.
[17:32:10.406] flashing tool "shbootmode" loaded.
[17:32:35.000] Using interface OpenPort 1.3 Universal TX26kFIXe40437d539f0b74e0481beb5e61c0abf91fb0f09
[17:32:38.500] SSM2 init
[17:32:38.687] SSM2 ECU ID is 3C 54 50 41 06
[17:32:38.828] Requesting Seed...
[17:32:38.890] Sending Key...
[17:32:39.671] interface close
[17:32:39.687] interface close

and then if i try again the followin happens:

[17:32:56.734] Using interface OpenPort 1.3 Universal TX26kFIXe40437d539f0b74e0481beb5e61c0abf91fb0f09
[17:32:58.468] SSM2 init
[17:32:58.937] SSM2 init
[17:32:59.406] SSM2 init
[17:32:59.859] SSM2 init
[17:33:00.343] SSM2 init
[17:33:00.796] SSM2 init
[17:33:01.265] SSM2 init
[17:33:01.734] SSM2 init
[17:33:02.203] SSM2 init
[17:33:02.671] SSM2 init
[17:33:03.296] kernel get version
[17:33:03.984] interface close
[17:33:03.984] interface close

furthermore the Instrument panel where the odometer is says "ER HC"

It is a tatrix universal cable, because it has the white Mitsu connector and the two subaru plugs. hope someone can help me.

thankx

[ziad]

i think i got the wrong green connector. as the connector is already connected and not flashing with the cable inserted. does any one know where it is in the car.

it is close to JDM spec or any RHD car.

[BoxerFan]

i think i got the wrong green connector. as the connector is already connected and not flashing with the cable inserted. does any one know where it is in the car.

it is close to JDM spec or any RHD car.

For RHD cars, the green connector is located at the passenger side footwell, behind the carpet edge (below storage compartment/aircond blower unit). U may need to use your fingers to flip over the connectors tucked away on the other side of the carpet. Hope this helps.

[ziad]

thanks yep worked it out