openecu.org

thisi is the second time I tried with this car with no luck
I had the conector pluged in, turned on the key & imediatly hit the buttom to start the aplication
I did this several times & couldent get it to work
Ill try the 1.28version & see if that does it when I can but any other ideas would be great'
thanks
JAK
PS my car is making 380WHP now using a GT32 & a few other goodies

http://www.saabnet.com/tsn/members/photos/195/5911.jpg
http://www.saabnet.com/tsn/members/photos/195/5823.jpg

[00:48:27.880] Version 1.27.658
[00:48:27.911] 9 memory models read.
[00:48:28.962] 66 ROM metadata models read.
[00:48:28.962] checksum module "subarudbw" loaded.
[00:48:28.962] flashing tool "wrx02" loaded.
[00:48:28.962] flashing tool "wrx04" loaded.
[00:48:28.962] flashing tool "sti04" loaded.
[00:48:28.962] flashing tool "sti05" loaded.
[00:48:28.962] flashing tool "evo" loaded.
[00:48:28.962] error loading FTD2XX.DLL
[00:49:23.480] ssm2_init
[00:49:23.681] ssm2_init
[00:49:23.881] ssm2_init
[00:49:24.081] ssm2_init
[00:49:24.282] ssm2_init
[00:49:24.482] ssm2_init
[00:49:24.682] ssm2_init
[00:49:24.882] ssm2_init
[00:49:25.083] ssm2_init
[00:49:25.283] ssm2_init
[00:49:25.634] kernel get version
[00:49:26.134] validating denso kernel ram area addr: FFFF0000 len: 0008

Oh by the way this was an 05 LGT
have a great weekend & thanks again
JAK

what cable you using?

I have the 1.2 cable
thanks for your time
JAK

I am unable to get it to work still & this is the version 1.28 on an 05 LGT
is there any more info I need to get to you to use this? or get help with this?
its really frustrating not to be able to use the cable & sw on these cars & there dosent seem to be suport here for my problem

hope your weekend went well
take care
JAK





[00:08:39.867] Version 1.28.716
[00:08:39.877] 8 memory models read.
[00:08:40.528] 71 ROM metadata models read.
[00:08:40.528] checksum module "subarudbw" loaded.
[00:08:40.528] flashing tool "wrx02" loaded.
[00:08:40.528] flashing tool "wrx04" loaded.
[00:08:40.528] flashing tool "sti04" loaded.
[00:08:40.528] flashing tool "sti05" loaded.
[00:08:40.528] flashing tool "mitsukernel" loaded.
[00:08:40.528] flashing tool "mitsukernelocp" loaded.
[00:08:40.528] flashing tool "mitsubootloader" loaded.
[00:08:40.528] error loading FTD2XX.DLL
[00:09:18.553] ssm2_init
[00:09:18.753] ssm2_init
[00:09:18.953] ssm2_init
[00:09:19.154] ssm2_init
[00:09:19.354] ssm2_init
[00:09:19.554] ssm2_init
[00:09:19.754] ssm2_init
[00:09:19.955] ssm2_init
[00:09:20.155] ssm2_init
[00:09:20.355] ssm2_init
[00:09:20.706] kernel get version
[00:09:21.206] validating denso kernel ram area addr: FFFF0000 len:

I'm not sure if this will solve your problem or even if it matters, but you do need to move the FTD2XX.dll to the winnt/system32 folder to eliminate that specific error message.