openecu.org

Posted: **Wed Oct 15, 2008 1:30 am**

I installed Ecuflash with success on new PC,
but after I select the car and press read ecu, it goes no response, EcuFlash hangs (freezes)…
No message or logs... Just process EcuFlash at 100% CPU …

What is this or what am I doing wrong? :shock:

EcuFlash Version 1.39.2152
Openport 1.3

Thanks :wink:

Posted: **Wed Oct 15, 2008 8:49 am**

if you're looking to read the X rom...its a no go still.

Posted: **Wed Oct 15, 2008 11:45 pm**

No, the problem it’s only for read rom, the prompt with list of cars, Mitsubishi cars selected, press reading and system failing… CPU 100% and not response (Win XP)...

Posted: **Wed Oct 22, 2008 12:30 am**

After several tests, I found that the problem is recent versions of EcuFlash…

If I install the version 129 of EcuFlash, it works perfectly

Solution; Edit with 140 and Flash with the version 129 of EcuFlash...

Another solution? :roll:

openecu.org

EcuFlash press read ecu > soft hangs (freezes)...

EcuFlash press read ecu > soft hangs (freezes)...