openecu.org

Ok I have big problem. I just installed my helix catted downpipe and I am trying to flash a stage 2 map onto my car. I have flashed my car before so I know how to do it. This time however I am getting an error and it is not working. I have uninstalled and re-installed with no sucess. Here is what I am getting.

[12:29:15.009] Version 1.35.1650 [12:29:15.019] 11 memory models read.
[12:29:15.019] scanning for metadata models in C:/Documents and Settings/Travis Gibbs/Desktop/WRX Tuning Tools/EcuFlash/rommetadata
[12:29:15.189] 234 ROM metadata models scanned.
[12:29:15.189] checksum module "subarudbw" loaded.
[12:29:15.189] flashing tool "wrx02" loaded.
[12:29:15.189] flashing tool "wrx04" loaded.
[12:29:15.189] flashing tool "sti04" loaded.
[12:29:15.189] flashing tool "sti05" loaded.
[12:29:15.189] flashing tool "mitsukernel" loaded.
[12:29:15.189] flashing tool "mitsukernelocp" loaded.
[12:29:15.189] flashing tool "shbootmode" loaded.
[12:29:26.145] Using interface OpenPort 1.3 Subaru TX48A8wd7c9774d51d1988f9a6be83e13ee17b47802c71d6
[12:29:34.627] SSM2 init
[12:29:34.797] SSM2 ECU ID is 43 12 58 41 06
[12:29:34.927] Requesting Seed...
[12:29:35.007] Sending Key...
[12:29:35.688] interface close
[12:29:35.708] interface close


Please help ASAP as I don't want to drive the car until I have flashed this new map.

Thanks

I get the same thing. I have tried a few differant things and still cant seem to get it to work. I found a older verson I have been using in the mean time.

I've seen that symptom when the test mode connectors are not connected properly. Double check that.

06 is DBW there are no test connectors. Anyone else?

spartan wrote:06 is DBW there are no test connectors.

Yes, there are.

OMG I am an idiot. Thanks for reminding me...