openecu.org

HI

this is my firts post, first of all, good work guys!

i have a evo9 and have some problems...

i have the ecuflash 1.35, i open the software, it regonize the cable ,i choose the model then when i try to download, the software just freaze, i worked out, but now i have another problem... the software don´t read nothing and displays:

[21:42:49.184] Version 1.34.1435
[21:42:49.184] 11 memory models read.
[21:42:49.184] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[21:42:49.402] 219 ROM metadata models scanned.
[21:42:49.402] checksum module "subarudbw" loaded.
[21:42:49.402] flashing tool "wrx02" loaded.
[21:42:49.402] flashing tool "wrx04" loaded.
[21:42:49.402] flashing tool "sti04" loaded.
[21:42:49.402] flashing tool "sti05" loaded.
[21:42:49.402] flashing tool "mitsukernel" loaded.
[21:42:49.402] flashing tool "mitsukernelocp" loaded.
[21:42:49.402] flashing tool "shbootmode" loaded.
[21:44:13.809] Using interface OpenPort 1.3b Universal TX28AreKa55474d511c2893791f0b457267b6732d3936d00
[21:44:13.809] interface close
[21:44:13.824] unable to connect to vehicle interface.
[21:44:13.824] interface close

vehicle key on, cluster panel on, 2 plugs well connected and nothing

i install and re install everything already 15times..i checked other posts, and still no solution...

i need help

vtec-t wrote:i have the ecuflash 1.35, i open the software, it regonize the cable ,i choose the model then when i try to download, the software just freaze, i worked out, but now i have another problem... the software don´t read nothing and displays:

[21:42:49.184] Version 1.34.1435

The log indicates you aren't running the V1.35 software.

Jon [in CT] wrote:

vtec-t wrote:i have the ecuflash 1.35, i open the software, it regonize the cable ,i choose the model then when i try to download, the software just freaze, i worked out, but now i have another problem... the software don´t read nothing and displays:

[21:42:49.184] Version 1.34.1435

The log indicates you aren't running the V1.35 software.

yes...i tryed w boths 1.34 and 1.35...

the evoscan works great, i really don´t understand w ecuflash doesn´t

1.35 freezes up on me to. When you run 1.34, do you get the pop up box telling you to turn the ignition to on then click ok? I'm pretty new to this to but I was able to get ECUFlash to read my IX MR's ECU. I'm not sure how critical the sequence of starting the software first before turning the ignition key is.

autoxer_minh wrote:1.35 freezes up on me to. When you run 1.34, do you get the pop up box telling you to turn the ignition to on then click ok? I'm pretty new to this to but I was able to get ECUFlash to read my IX MR's ECU. I'm not sure how critical the sequence of starting the software first before turning the ignition key is.

i initialise the software and then connect key on, so far so good, then i chosse the car type, and then the log just reads that...im tired to install and reinstall all the drivers and software...i need help

its frustating...

why to have a forum so there is no boby to help and exchange knowlege...

For one, you have to make sure all remnants of the cable drivers are properly uninstalled, before reinstalling 1.34. Uninstall all programming completely, including all previous drivers. Then reinstall 1.34 with the appropriate drivers. And yes startup sequencing is critical when conncecting to the car.

Another note of reference, EvoM is THE hub for all information exchange. You might help yourself by reading there often.