openecu.org

Here is the log, I have the Com setup at com3 and I select the DBW 2004-2006 option as it is the only one I see 05 Sti mentioned. The green test connecter is connected and I am using the cobb ap cable.

Anyone can help me out??

[00:03:58.392] Version 1.28.716
[00:03:58.412] 8 memory models read.
[00:03:58.683] 71 ROM metadata models read.
[00:03:58.683] checksum module "subarudbw" loaded.
[00:03:58.683] flashing tool "wrx02" loaded.
[00:03:58.683] flashing tool "wrx04" loaded.
[00:03:58.683] flashing tool "sti04" loaded.
[00:03:58.683] flashing tool "sti05" loaded.
[00:03:58.683] flashing tool "mitsukernel" loaded.
[00:03:58.683] flashing tool "mitsukernelocp" loaded.
[00:03:58.683] flashing tool "mitsubootloader" loaded.
[00:03:58.683] error loading FTD2XX.DLL
[00:04:26.102] ssm2_init
[00:04:26.122] ssm2_init
[00:04:26.132] ssm2_init
[00:04:26.142] ssm2_init
[00:04:26.162] ssm2_init
[00:04:26.172] ssm2_init
[00:04:26.182] ssm2_init
[00:04:26.192] ssm2_init
[00:04:26.212] ssm2_init
[00:04:26.222] ssm2_init
[00:04:26.383] kernel get version
[00:04:26.703] validating denso kernel ram area addr: FFFF0000 len: 0008

Im getting the exact same error message when i try to read my wagons ecu.
Im using ecuflash v 1.29 and a ver 1.3 cable.The cable is working since I can log with ecuexplorer.The cars in test mode with the green connectors connected.Is this a ver 1.29 ecuflash problem???If so anybody know were you can download ver 1.28? Anybody come up with a solution to this one yet? Anybody,Anybody..........?

The Cobb AP cable will not work with EcuFlash. For the later poster, you can try 1.28 here:

http://openecu.org/downloads/ecuflash_setup128.rar

I will be releasing a new version as soon as I get feedback from some testers regarding the 1.28/1.29 problem.

Colby

cboles wrote:The Cobb AP cable will not work with EcuFlash. For the later poster, you can try 1.28 here:

http://openecu.org/downloads/ecuflash_setup128.rar

I will be releasing a new version as soon as I get feedback from some testers regarding the 1.28/1.29 problem.

Colby

hope to see ur new version soon
mean while engine upgrade projects are put on hold