Legacy 2.0 R (2006, European)
Posted:
Thu Jun 26, 2008 11:55 pmby Legacy06
Hello, We have problem by reading the data, because the software, which is to be downloaded for the tool Tactrix Open Port 1.3U, requires an additional connection besides the OBD port. But we cannot find any. How should we connect the tool Tactrix Open Port 1.3U to the car Subaru Legacy 2.0R (2006 edition)? Which socket to be connected, and where to connect on the car? Many thanks in advance
Posted:
Fri Jun 27, 2008 4:08 amby TunerTools
Which software are you using?
Posted:
Fri Jun 27, 2008 5:14 amby Jon [in CT]
The USB connector plugs into the laptop computer. The large connector plugs into the car's OBD-II port (see
http://autocenter.weber.edu/OBD-CH/documents/newdocuments/subaru/legacy/2005_subaru_legacy.jpg). The remaining smaller connector is only used with Mitsubishi cars.
Posted:
Fri Jun 27, 2008 5:57 amby Legacy06
We tried as "Jon" wrote, but the software waited any other connection. The software has been downloaded from the site of TunerTools, it was offered for Tactrix Open Port 1.3U.
Posted:
Fri Jun 27, 2008 6:04 pmby TunerTools
Legacy,
Please tell us the name of the software application as there are several available on our website and included on the CD that ships with our products.
Cheers,
Lloyd
