openecu.org

[11:15:30.421] Version 1.40.2178
[11:15:30.437] 19 memory models read.
[11:15:30.437] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[11:15:32.968] 319 ROM metadata models scanned.
[11:15:32.968] checksum module "subarudbw" loaded.
[11:15:32.968] flashing tool "wrx02" loaded.
[11:15:32.968] flashing tool "wrx04" loaded.
[11:15:32.968] flashing tool "sti04" loaded.
[11:15:32.968] flashing tool "sti05" loaded.
[11:15:32.968] flashing tool "mitsukernel" loaded.
[11:15:32.968] flashing tool "mitsukernelocp" loaded.
[11:15:32.968] flashing tool "shbootmode" loaded.
[11:15:33.093] flashing tool "shaudmode" loaded.
[11:15:33.093] flashing tool "subarucan" loaded.
[11:15:42.828] J2534 error [ERR_SUCCESS].
[11:15:42.828] unable to connect to vehicle interface.
[11:15:42.828] interface close

WHAT TO DO?

Have you updated your firmware?... Try to connect OP2 interface with internet connection, when it's will be done, you will able to read via CAN bus. I solve the same problem as described.