Page 1 of 1
problems with ecu flash useing openport1.2
Posted:
Wed Feb 08, 2006 7:43 pmby fros_02_wrx
i cant get any program to read my ecu rom i get this everytime
[0.000] kernel flash disable
[3.172] denso02_bootloader_cmd_start
[3.062] denso02_bootloader_cmd_start
[3.063] denso02_bootloader_cmd_start
[3.062] denso02_bootloader_cmd_start
[3.047] denso02_bootloader_cmd_start
[2.266] unable to load kernel
am i supose to disconnect the white box and connect the green plug or both or neither?? im so freking confused! please help me befor i go insane
Posted:
Wed Feb 08, 2006 8:13 pmby qoncept
You want both connected and the key set to the on position to dump.
Posted:
Wed Feb 08, 2006 8:15 pmby fros_02_wrx
ok thats how i did it and i still have the same problem if you have yahoo messenger my ID is fros_02_wrx thanks for helping man
Posted:
Wed Feb 08, 2006 8:16 pmby intrawrx
I posted a reply on the Tari Forums.
Posted:
Wed Feb 08, 2006 10:37 pmby fros_02_wrx
thankis guys i got it all figure out now and its all working whats a good program to control the boost thru the stock ecu or is that possiable?
Posted:
Mon Feb 20, 2006 10:35 pmby radsdau
I posted a reply on the Tari Forums.
intrawrx, can you point me to this post please? Sorry, I couldn't find it. I'm having a similar problem with my 01/02 AF422.
thankis guys i got it all figure out now and its all working
fros_02_wrx, if you can help me out my telling me what you did to make it work, I'd be grateful too.
Thanks!
radsdau
Posted:
Mon Feb 20, 2006 11:07 pmby fros_02_wrx
i used ECU flash, first open the program then connect to the OBDport thenconnect the green box under the dash,then click read from ecu then turn the ignition on and click ok
Posted:
Wed Apr 05, 2006 6:29 amby GotWRX03
I am having the same exact trouble with MY03 USDM. I've tried and tried, but no luck at all.
use 3.0.25
Posted:
Wed Apr 05, 2006 6:39 pmby Thumper
If using ECUExplorer, try using version 3.0.25 and not 3.0.6.
I couldn't get it to work with 3.0.6 but it works great with 3.0.25