openecu.org

Euro Sti 2006 DBW

I could connect and change my ecu maps last 2 days but yesterday I wanted to change agaın and I started but when I downloadig new program the connection terminated. So now I can not connect and see my ecu with ecuflash, ecuexplorer, ecuedit logger and other diagnostic tools
what can be happened?
ıs ıt blocked or damaged?
how can I solve thıs problem or any one see this ?

ECuflash 1.29a

Code: Select all

[02:44:13.296] ssm2_init
[02:44:13.500] ssm2_init
[02:44:13.703] ssm2_init
[02:44:13.906] ssm2_init
[02:44:14.109] ssm2_init
[02:44:14.312] ssm2_init
[02:44:14.515] ssm2_init
[02:44:14.718] ssm2_init
[02:44:14.921] ssm2_init
[02:44:15.125] ssm2_init
[02:44:15.500] kernel get version
[02:44:16.000] validating denso kernel ram area addr: FFFF0000 len: 0008

Also is any one knows that is there a ecu fuse or ecu delay? I couldt find it any where.where is their locations if they exist?

my euro 2006 DBW STi does this sometimes with my mappers laptop, then a couple of days later it is fine.... very weird.

But there are lots of weird things that happen with mine - eg: when the tactrix cable is plugged in and hooked up - the door open warning light comes on