openecu.org

Anyone know what the injector scaling is for the Deutchwerks 850 cc/min injectors?

Thanks, JC

bump.............

how about latency too....

same injectors as above used

Code: Select all

6.5     9.0     11.5      14.0    16.5

Code: Select all

4.02    2.14   1.42     1.14     0.60

My injector flow was set to 600 cc and I got 14.7-15.1.........

at injector flow 830cc was 19.1........

got info from.....
http://forums.nasioc.com/forums/showthr ... +injectors

still testing........

I have been logging in the UTEC...... what values do you want to examine using enginuity and is there a place to find more info on how to analysis logs....

please disregard some of the above info.....I did not have my UTEC Parameters injector scaler values set to the same number...in my case 650/650 versus 650/420..........

Now I have my ecu reflashed to 800 cc injector scaling with the UTEC at 800/800 with the following latency values with much better results..

Code:
6.5 9.0 11.5 14.0 16.5

Code:
4.02 2.14 1.42 1.14 0.60

updated 5-28-07