Can't write to JDM evo 9 ecu
Posted: Thu Nov 16, 2006 6:47 amHi Guys,
I'm able to download the map from my JDM evo 9 ecu however when I try to write to it I get the following error
[00:06:18.414] 524288 byte image read.
[00:06:52.102] 524288 byte image written.
[00:07:18.590] sending init sequence 1 (0001)
[00:07:19.632] got 0x05 response
[00:07:19.632] sending init sequence 2
[00:07:19.642] got 0x1B response
[00:07:19.642] sending init sequence 3
[00:07:20.052] entering bootloader
[00:07:20.082] sending kernel size (3424)
[00:07:20.102] sending kernel load address (0xFFFF6000)
[00:07:20.132] uploading kernel
[00:07:20.703] verifying kernel checksum response
[00:07:20.703] kernel valid
[00:07:20.924] kernel get version
[00:07:20.924] rkrv: preamble 1 error
I'm using ecuflash 1.29a with the Tactrix OpenPort 1.3 cable.
I'm able to read and write successfully to JDM evo 7 and 8
Has any one ran into this problem before.
Please help
I'm able to download the map from my JDM evo 9 ecu however when I try to write to it I get the following error
[00:06:18.414] 524288 byte image read.
[00:06:52.102] 524288 byte image written.
[00:07:18.590] sending init sequence 1 (0001)
[00:07:19.632] got 0x05 response
[00:07:19.632] sending init sequence 2
[00:07:19.642] got 0x1B response
[00:07:19.642] sending init sequence 3
[00:07:20.052] entering bootloader
[00:07:20.082] sending kernel size (3424)
[00:07:20.102] sending kernel load address (0xFFFF6000)
[00:07:20.132] uploading kernel
[00:07:20.703] verifying kernel checksum response
[00:07:20.703] kernel valid
[00:07:20.924] kernel get version
[00:07:20.924] rkrv: preamble 1 error
I'm using ecuflash 1.29a with the Tactrix OpenPort 1.3 cable.
I'm able to read and write successfully to JDM evo 7 and 8
Has any one ran into this problem before.
Please help