Subaru STI UK02-03-pr
Posted: Sat Nov 04, 2006 4:14 pmJust thought you may like this genuine verified p..dri upgrade! Please let me know if its ok on US fuel etc. Thanks, Mark
openecu.org
Forums for ECU reverse engineering and modification
http://forums.openecu.org/
Subaru STI UK02-03-pr
Page 1 of 1
Posted: Sat Nov 04, 2006 4:14 pmPosted: Tue Nov 07, 2006 2:19 amthis file have an "on-off" vtt map (zero ° or 30,23° only ) , why ?
Posted: Tue Nov 07, 2006 6:49 amI would guess it is something to do with emissions, but could be wrong.
Posted: Thu Dec 28, 2006 2:49 amLooks strange?
Have anybody tested the map?
Have anybody tested the map?
Posted: Thu Apr 19, 2007 2:24 pmThis is a bit off topic but i tried this map in my car (MY02 UK STI) more as a trial than anything - was 1st flash different from the original rom. everything went well (i tried a test flash 1st and a compare). But afterwards the car would crank but not start. i carped myself a bit and then flashed the original back on and everything ok again.
is there something i need to do the initialise the rom or something - i didn't do anything once i'd flashed my orignal back on (short of dis-connecting the flash blocks.
i wonder if it was the immobiliser or something, but i wouldn't expect to be able to crank if it was.
is there something i need to do the initialise the rom or something - i didn't do anything once i'd flashed my orignal back on (short of dis-connecting the flash blocks.
i wonder if it was the immobiliser or something, but i wouldn't expect to be able to crank if it was.
Posted: Tue May 01, 2007 2:32 amtested this on my car eu sti and works fine
1.2 bar
so much smoother than the stock sti crap map!
thanks for sharing:)
1.2 bar
so much smoother than the stock sti crap map!
thanks for sharing:)
Posted: Tue Oct 23, 2007 5:15 amIt didn't load into my ECU first time either for some reason, I re-loaded my original rom then tried again without turning the ignition off and it loaded fine.
Works well, better accel from low down but seems a bit sluggish up the rev range so I'm going to log it over the weekend and see if it's correcting for knock or if it's just me!! Might just be that the map is much smoother than the standard Type UK map.
I need to do some work on it because I don't have the sports cat or uprated fuel pump that come with the PPP so I was expecting it to have some issues that I could look at by logging it on the car.
vtt map not applicable to my car as its a 2002my and doesn't have the variable inlet cam motor.
Works well, better accel from low down but seems a bit sluggish up the rev range so I'm going to log it over the weekend and see if it's correcting for knock or if it's just me!! Might just be that the map is much smoother than the standard Type UK map.
I need to do some work on it because I don't have the sports cat or uprated fuel pump that come with the PPP so I was expecting it to have some issues that I could look at by logging it on the car.
vtt map not applicable to my car as its a 2002my and doesn't have the variable inlet cam motor.
Posted: Wed Mar 05, 2008 4:18 pmwill this map be ok for an STI8?
My car is a UK car
2003 STi UK
I have the decat downpipe, fuel pump and panel filter fitted to my car.. sounds exactly what I need
My car is a UK car
2003 STi UK
I have the decat downpipe, fuel pump and panel filter fitted to my car.. sounds exactly what I need
Posted: Wed Apr 02, 2008 7:25 amI guess..
Take a backup of you existing ROM and try it out.. What is the worst thing that could happen ?
Take a backup of you existing ROM and try it out.. What is the worst thing that could happen ?