Thanks, all coming together nicely
You have PM GTOdesign.
GTODesign wrote:Just comparing this against my own work (correct me if I'm wrong)...
RPM/Load scales... Agreed (RPM factor 3.90625, Load factor 0.3125)
All fuel/IG maps... Agreed
Injector scaling multiplier... I would suggest the original value is $00 39 = 560cc
Rev limit... I would suggest the original value is $00 18 = 7500rpm, factor 312.5
Best regards
Dylan
jaytech wrote:GTODesign wrote:Just comparing this against my own work (correct me if I'm wrong)...
RPM/Load scales... Agreed (RPM factor 3.90625, Load factor 0.3125)
All fuel/IG maps... Agreed
Injector scaling multiplier... I would suggest the original value is $00 39 = 560cc
Rev limit... I would suggest the original value is $00 18 = 7500rpm, factor 312.5
Best regards
Dylan
The injector scaling multiplier $00 39= 513cc. The ECU doesn't scale the injector exactly 560cc. The rev limiter is $03 DA on EVO 9 and EVO 8, and not $00 18. Everything else you have is correct!
PM me, so we can work together to get this done.
Jason
Mitsubishi ECU Specialist
jaytech wrote:Fuel and Timing is Engine Load % not G/S....trust me on that one.
Those high numbers in the timing maps are negetive degrees of timing. And timing on evo 8 and 9 RPM is scaled to 11,000 RPM. So that is correct.
Also the Fuel and Timing maps are somewhat correct, but on the fuel maps, the upper right corner belongs on the lower left corner of the maps and vice versa. Same as for the timing maps.
And one other thing... Engine Load percent belongs on the upper row, and RPM is on left column of the map.
You did a great job there!!!
Jason
Mitsubishi ECU Specialist
GTODesign wrote:jaytech wrote:Fuel and Timing is Engine Load % not G/S....trust me on that one.
Those high numbers in the timing maps are negetive degrees of timing. And timing on evo 8 and 9 RPM is scaled to 11,000 RPM. So that is correct.
Also the Fuel and Timing maps are somewhat correct, but on the fuel maps, the upper right corner belongs on the lower left corner of the maps and vice versa. Same as for the timing maps.
And one other thing... Engine Load percent belongs on the upper row, and RPM is on left column of the map.
You did a great job there!!!
Jason
Mitsubishi ECU Specialist
How did you come to the conclusion that engine load is % and not g/s?
Return to Mitsubishi (all models)
Users browsing this forum: No registered users and 24 guests