Cant get sd card logging to work.

Cant get sd card logging to work.

Postby muzzasti » Sat Aug 25, 2012 12:32 am

Hi,

I cant get logging to work w/my op 2.0.
06sti A8DH200V
I have ecuflash 1.43.3150
2gb micro sd formatted to fat 32.
logcfg.txt provided by my tuner saved to root directory of sd.
type=ssmk

paramname = (ECT)
paramid = 0x000008
databits = 8
scalingrpn = x,40,-

paramname = A/F_C#1
paramid = 0x000009
databits = 8
scalingrpn = x,128,-,100,*,128,/

paramname = A/F_L#1
paramid = 0x00000A
databits = 8
scalingrpn = x,128,-,100,*,128,/

paramname = (rpm)
paramid = 0x00000E
databits = 16
scalingrpn = x,4,/

paramname = (kph)
paramid = 0x000010
databits = 8
scalingrpn = x

paramname = Total_Timing
paramid = 0x000011
databits = 8
scalingrpn = x,128,-,2,/

paramname = (IAT)
paramid = 0x000012
databits = 8
scalingrpn = x,40,-

paramname = (g/s)
paramid = 0x000013
databits = 16
scalingrpn = x,100,/

paramname = MAF(V)
paramid = 0x00001D
databits = 8
scalingrpn = x,50,/

paramname = WGDC
paramid = 0x000030
databits = 8
scalingrpn = x,100,*,255,/

paramname = In_R
paramid = 0x00003C
databits = 8
scalingrpn = x,50,-

paramname = In_L
paramid = 0x00003D
databits = 8
scalingrpn = x,50,-

paramname = (g/rev)
paramid = 0xFF6AC8
databits = 16
scalingrpn = x,.00006103516,*

paramname = MAP(bar_abs)
paramid = 0xFF6AD6
databits = 16
scalingrpn = x,0.001333224,*

paramname = FBKC
paramid = 0xFF6AF0
databits = 8
scalingrpn = x,.3515625,*,45,-

paramname = FLKC
paramid = 0xFF6AF3
databits = 8
scalingrpn = x,.3515625,*,45,-

paramname = defogger_sw
paramid = 0x64
databits = 1
offsetbits = 5
isvisible = 0

conditionrpn = defogger_sw,1,==
action = start

conditionrpn = defogger_sw,0,==
action = stop

I plug it in to the 0bd2 start the card, go for a drive, press defogger. Nothing happens. lights on the 0p2 dont change.
Remove from car, plug in to computer, read sd card. Nothing is there apart from the logcfg.txt.
I have double checked everything even bought a new sd card.
I have followed multiple sets of instruction found here and other places on the net.

The op 2.0 works fine otherwise. I have downloaded my rom and learning view works perfectly.

I am completly lost as what to do next.
Am I missing something.
Please help.

Thanks,

Murray.
muzzasti
 
Posts: 2
Joined: Sat Aug 25, 2012 12:18 am

Re: Cant get sd card logging to work.

Postby ProfessWRX » Wed Aug 29, 2012 3:41 pm

Did you update the openport firmware using EcuFlash yet?
ProfessWRX
 
Posts: 1
Joined: Wed Aug 29, 2012 3:36 pm

Re: Cant get sd card logging to work.

Postby muzzasti » Thu Sep 06, 2012 4:21 am

Yes, I believe I have.
Clicked on licensing then apply.

It comes up in the text as updated.

Still stumped.
muzzasti
 
Posts: 2
Joined: Sat Aug 25, 2012 12:18 am


Return to Openport Stand-Alone Logging Beta

Who is online

Users browsing this forum: No registered users and 0 guests

cron