evo 7 ecu

User topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Re: evo 7 ecu

Postby wcassar » Sat Nov 12, 2011 4:27 am

So when i read from the ecu with the evoscan, the reflash connector did not been used.....did I understand you well?
While when using the ecuflash, the one wire (12pin) connector is used too.

regards
wcassar
 
Posts: 14
Joined: Mon Jun 30, 2008 11:49 am
Location: Malta

Re: evo 7 ecu

Postby radsdau » Sun Nov 13, 2011 3:36 pm

Sorry- I should have mentioned that connecting to read the ROM and connecting to reflash the ROM use the same process, which is putting the ECU into boot mode, then uploading a reflashing kernel. The reflashing kernel also provides ROM read functions, as well as CRC checking for the data to be reflashed.

If you can read the ROM, you should be able to reflash the ROM, presuming there is sufficient battery voltage available.

Reading codes and data is done while the car is still in normal operation, i.e., not in boot mode.
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm

Re: evo 7 ecu

Postby wcassar » Tue Nov 15, 2011 8:00 am

i made the user set as developer but also no success in connecting with ecu
wcassar
 
Posts: 14
Joined: Mon Jun 30, 2008 11:49 am
Location: Malta

Re: evo 7 ecu

Postby wcassar » Tue Nov 15, 2011 10:13 am

can I see the rom from evoscan?
wcassar
 
Posts: 14
Joined: Mon Jun 30, 2008 11:49 am
Location: Malta

Previous

Return to Interface Hardware

Who is online

Users browsing this forum: Google [Bot] and 5 guests