Hi all.
My first post here. G'day!
I'm trying to get LC-1 standalone OP2.0 logging working. Like some others I've seen, I'm just getting zero values from it.
- This is for a Mitsu. All mode23 logging is working beautifully, standalone.
- My OP2.0 firmware version is 1.11.3137.
- All connectors seem to be plugged in securely.
- The LC-1 data link works correctly to the Innovate LogWorks3 application, connected to serial port on a PC. Valid, dynamic AFRs are displayed.
- The "terminator" thingy is plugged into the LC-1 "IN" socket, and stereo 3/32" male-to-male patch lead is used from LC-1 "OUT" to the OpenPort 2.0.
- My "logcfg.txt" file doesn't have any triggers - nothing fancy. Just the standard Mitsu mode23 entries, and the sample "inno" text from the relevant example file under "OpenEcu/.../logging" (the Subaru example).
I've seen LC-1 standalone logging reported as working in posts 6-9 months ago, but lately I've read more than one report of "all zeroes" for people trying LC-1 standalone. Makes me wonder if perhaps the addition of LM-1 support somehow caused an incompatibility with the old LC-1 protocol. Yes, that's pure, uninformed conjecture, sorry!!!
I've tried "baud=19200" under the "type=inno" (as noted in previous posts), but I still get zero values.
So a bit at a loss now - not sure where to go next with it. Has anyone actually got this working on a recent OP2.0 firmware?
I'd hate to give standalone logging the flick - it's a brilliant system...
Cheers,
Rich