4G93 ECUFLASH

4G93 ECUFLASH

Postby betogt » Tue Sep 28, 2010 4:00 pm

HI, I ALSO HAVE A MITSUBISHI MIRAGE LS COUPE 4G93, I JUST OVERHAULED THE ENGINE AND IT HAS A COMPRESSION OF 225 PSI. SO I WANT TO FLASH MY ECU, BUT THIS CAR DOESNT HAS ANY OTHER PORT FOR THE TACTRIX CABLE, SO I HAVE UNDERSTOOD THAT THE TACTRIX PORT HAS TO BE TAKEN FROM THE ECU, BUT I DONT KNOW WHAT PIN OR PINS SHOULD I HAVE TO CONNECT TO IT. IF YOU COULD HELP ME ILL APPRECIATE!!! THANK YOU VERY MUCH FOR YOUR TIME!!!
betogt
 
Posts: 14
Joined: Wed Jul 30, 2008 9:44 pm

Re: 4G93 ECUFLASH

Postby todd-w » Fri Oct 01, 2010 3:19 pm

what year ? metal or plastic ecu case , try a wire to pin 79 at ecu for the white init socket .
todd-w
 
Posts: 330
Joined: Tue Nov 14, 2006 3:01 pm
Location: Ireland

Re: 4G93 ECUFLASH

Postby betogt » Sat Oct 02, 2010 10:22 am

its a 99 mirage!!! plastic case
betogt
 
Posts: 14
Joined: Wed Jul 30, 2008 9:44 pm

Re: 4G93 ECUFLASH

Postby todd-w » Sun Oct 03, 2010 1:44 pm

put a wire into pin 79 at the ecu and connect to the single wire white connector on tactrix cable
todd-w
 
Posts: 330
Joined: Tue Nov 14, 2006 3:01 pm
Location: Ireland

Re: 4G93 ECUFLASH

Postby betogt » Thu Oct 07, 2010 4:18 pm

ok thank you very much!!!!
betogt
 
Posts: 14
Joined: Wed Jul 30, 2008 9:44 pm


Return to Mitsubishi (all models)

Who is online

Users browsing this forum: No registered users and 9 guests