Thanks for the reply.
I understand its now retro gear(LM-1) and that it would be easier if you had one for development. I'm happy to send you mine if needed, though I understand also that there are probably minimal users with this spec and requirement, but it does leave me without functionality I wanted or believed I could have
.
I think your idea if you have the time and inclination would certainly work, as evoscan is able to log from either LM-1/LC-1 so that aspect is possible. I'm happy to try and test anything you produce to see if we can get this to work as it would bring something to my setup that it was originally built/purchased for.
As far as the protocols go the differences in the first word are bits 13,9,7
In SPv1 they are always zero
In SPv2 bits 13 and 9 of first word are always 1 whilst 7 is zero.
As said above if you have the time and inclination I'd be happy to work with you on this one. Let me know what you think and if you're willing to give it a go.
Thanks for the response and giving an understanding of whats involved.
Many thanks.
cboles wrote:I can try to add support for it, but it would require some firmware changes as the current firmware only supports the version 2 protocol. The main impediment is that I don't own a LM-1 for development to test it with, and they aren't made anymore (the LM-2 is the current version they are selling). I need to look at the protocols carefully again to see if I can support both versions without any hints from the user configuration. I don't want to add support for it in a way that breaks the version 2 stuff or prevents it from reliably synchronizing on the first packet word. It might be easier to start with me building an updated version of the J2534 innovate logging sample for the PC first, and have you try that and let me know if it works, then I can port that to the OP2 logging.