Which WRX's are drive-by-wire? Am I an idiot?

Developer topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

Which WRX's are drive-by-wire? Am I an idiot?

Postby snake2332 - n00b » Thu Mar 06, 2008 3:17 pm

I must be stupid or something but I've searched for half an hour and cannot find a website detailing which versions of the WRX are DBW, which I need to know when purchasing a tactrix cable. I'm guessing my USDM 2004 WRX is not dbw, but would like to know for sure.
snake2332 - n00b
 
Posts: 23
Joined: Thu Mar 06, 2008 6:53 am
Location: Montana, USA

Postby Freon » Thu Mar 06, 2008 9:55 pm

In the US at least, all 2.5L turbo cars are DBW and all 2.0L turbo cars are not. For the WRX, it would be 06+.
Freon
 
Posts: 700
Joined: Thu Nov 17, 2005 5:50 pm
Location: Indianapolis, IN

Postby xswrex » Fri Mar 07, 2008 2:50 am

or a simple look under the bonnet would do...
xswrex
 
Posts: 110
Joined: Thu Oct 20, 2005 3:50 am

Postby snake2332 - n00b » Fri Mar 07, 2008 6:11 am

OK cool, thanks guys. I'm still new to this all but am excited to learn. So I will need this: http://www.tactrix.com/product_info.php?products_id=35 and not this: http://www.tactrix.com/product_info.php?products_id=33, right? I am at work and the images on that website are blocked by our web filter. And this website: http://openecu.org/index.php?title=EcuFlash:VehicleSupport says that I need 1.3S or 1.3U. I see the 1.3U but the tactrix website doesn't show 1.3S on any of the products. Their website blows.
snake2332 - n00b
 
Posts: 23
Joined: Thu Mar 06, 2008 6:53 am
Location: Montana, USA

Postby Freon » Mon Apr 21, 2008 5:32 pm

There have been a few revisions. Not all cables are still available as they are outdated.

You should get the Subaru kit here:
http://www.tactrix.com/product_info.php?products_id=35
Freon
 
Posts: 700
Joined: Thu Nov 17, 2005 5:50 pm
Location: Indianapolis, IN

Postby snake2332 - n00b » Wed Apr 23, 2008 7:14 am

I did get a tactrix cable and flashed a stage 1 setup to my car. I adjusted my wastegate arm cuzz my car was boosting to like 17 or 18psi when I bought it. Now it boosts about 15 psi in 4th gear.

So now I'm trying to use STiScan with my tactrix cable and it's not working. I want to use this program because it has a nice gauge setup and is fully customizable and not so basic looking like Enginuity's logger. I'm gonna go start a thread somewhere regarding STiScan, maybe on NASIOC.

Thanks Freon, you're a good help. I'm still a green n00b but I'm getting better.
snake2332 - n00b
 
Posts: 23
Joined: Thu Mar 06, 2008 6:53 am
Location: Montana, USA


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 5 guests