Hello Peeps, wonder if someone could kindly help me out here. I have a 2005 sti uk spec , have connected the two green connectors under the steering wheel to go into diagnostics mode and also the 4 prong attachemtn that came with the kit. I hook up to the laptop and try to read ecu and keeps coming up with an error and says to read log.
[00:37:47.484] Version 1.30.1095
[00:37:47.484] 8 memory models read.
[00:37:49.875] 148 ROM metadata models read.
[00:37:49.875] checksum module "subarudbw" loaded.
[00:37:49.875] flashing tool "wrx02" loaded.
[00:37:49.875] flashing tool "wrx04" loaded.
[00:37:49.875] flashing tool "sti04" loaded.
[00:37:49.875] flashing tool "sti05" loaded.
[00:37:49.875] flashing tool "mitsukernel" loaded.
[00:37:49.875] flashing tool "mitsukernelocp" loaded.
[00:37:49.875] flashing tool "mitsubootloader" loaded.
[00:38:03.640] SSM2 init
[00:38:03.828] [FF] A2 10 0F 3D 44 59 30 05 73 FA EB 80 2A 43 FE AA
00 10 00 60 CE 54 FC B0 00 00 00 00 00 00 00 00
00 DC 00 00 55 1F 00 00 00 02 00 00 00 00 00 E0
00 00 00 00 00 00 00 00
[00:38:03.828] SSM2 ECU ID is 3D 44 59 30 05
[00:38:03.828] SSM2 cmd_0x81
i get that far when the error comes up. can anyone shed some light on the problem or if they have encountered it.
Regards