Just received my cable (Openport 1.3M) and tried to read the ROM off my Mitsubishi E8 MR FQ-300 but it fails, here's the log.
- Code: Select all
[01:09:38.047] Version 1.29.906
[01:09:38.057] 8 memory models read.
[01:09:42.013] 140 ROM metadata models read.
[01:09:42.013] checksum module "subarudbw" loaded.
[01:09:42.013] flashing tool "wrx02" loaded.
[01:09:42.013] flashing tool "wrx04" loaded.
[01:09:42.013] flashing tool "sti04" loaded.
[01:09:42.013] flashing tool "sti05" loaded.
[01:09:42.013] flashing tool "mitsukernel" loaded.
[01:09:42.013] flashing tool "mitsukernelocp" loaded.
[01:09:42.013] flashing tool "mitsubootloader" loaded.
[01:09:58.296] This vehicle interface does not support needed features.
[01:09:58.296] unable to connect to vehicle interface.
any ideas what to try?
No access to another cable unfortunately - they're quite rare here in the UK.
Ecuflash shows the cable as working in the bottom right status pane but as soon as i attempt to read, just get the "does not support needed features" error logged.
Cheers,
Boony