Cant ROM ECU from WRX JDM 2000-

Developer topics relating to software that provides a tuning UI to alter ECU code and data

Moderator: Freon

Cant ROM ECU from WRX JDM 2000-

Postby feelsti » Fri Jul 13, 2012 9:09 am

Hi all/
I have a problem/
When i try to ROM ECU from my WRX to computer, i have a issue/

I connect the green connector under steer and connect the tatrix to obd-2 plug
Then i am start soft ECU FLASH, chose the 2001- non-USDM WRX and press read ECU
then torn on the ignition and quickly press OK
see the log:
[10:34:11.727] Device Firmware Version: 1.10.3020
[10:34:19.405] denso02_bootloader_cmd_start
[10:34:20.637] denso02_bootloader_cmd_start
[10:34:21.870] denso02_bootloader_cmd_start
[10:34:23.118] denso02_bootloader_cmd_start
[10:34:24.350] denso02_bootloader_cmd_start
[10:34:24.787] kernel get version
[10:34:25.099] interface close
[10:34:25.130] interface close


what happens oh my God

HEEELP ME
feelsti
 
Posts: 18
Joined: Mon Apr 30, 2012 9:39 am

Return to Tuning Software

Who is online

Users browsing this forum: No registered users and 2 guests