xswrex wrote:Freon wrote:I've been using Ecuedit, it works like a charm. XMLwrite created a darn good XML. It doesn't include the injector scaling factor conversion to CC (because it isn't in the rom that way), but the map editing is really good.
it should have the 2450000/[value], are you sure?
Can you create again the XML with your rom and let me know? If there is a problem i should fix it!
I have created xml's for the following roms and the scaling was included
A2ZJ500J (04 us sti)
A2ZJ710J (04 us sti)
A2ZJB10J (05 us sti)
A2ZJ500I (04 forester XT with sti injectors)
these had 456cc
A8DH200Z (06 eu sti )
this had 498cc
usdm sti should be 550cc injectors, per everyone in the industry. Freon's test with perrin 820cc injectors suggests the constant should be ~29546000 to make this field in the units we'd like. (see, i knew it was wrong, I was just wrong about how it was wrong;-)
stock value: 5372, flow is ~550cc, scales to 456
perrin: needed hex(for 14:7 idle): 3602.941, flow is ~820, needed to enter 680
Using those points i calculated the 2.9m value.
Oh, additional note/idea for xmlwrite:
Would it be possible to duplicate the temperature and speed calcs to english units? I know I'm more able to quickly think that way.
like so:
<scaling name="DATA-13-Deg C" units="Deg C" toexpr="x" frexpr="x" format="%.0f" min="0" max="0" inc="256" storagetype="float" endian="little"/>
<scaling name="DATA-13-Deg F" units="Deg f" toexpr="9*x/5+32" frexpr="(x-32)*5/9" format="%.0f" min="0" max="0" inc="256" storagetype="float" endian="little"/>