ecuEdit v2.4 - ECU Tuning & Logging solution

[epifan]

I'm made some bug fixes in ecuEdit.
Download fixed version: http://www.epifansoft.com/download/ecuedit_v2_2.exe

[JRSCCivic98]

You missed one. The version states 2.2 on the status bar, but 2.1 in Help/About.

[swifty]

I've been trying out the wideband feature using an LM-1. I connected the LM-1 to the sensor on the car and used the serial cable to connect the LM-1 to the serial port on my laptop. I have the Tactrix cable connected to the OBD2 port and a usb on my laptop. I start the engine, switch on the LM-1 and open the logger. Connect to the ecu and then press Ctrl-P and I see the data in the min, max and current fields as expected.

I go to the menu and select Connect / External Sensors / Innovate SDK and the AFR field appears. I go into Configure Sensor and select the COM1 option (the only one available) and this gives me all the LM-1 channels. I click on LM1-O2 then click Apply. When I look at the data being captured my AFR fields all have a value of 4 in them. Am I doing something wrong or is this all the data it is supposed to show ? I know it doesn't write to the log as it's the trial version but shouldn't it display the same values as the LM-1 display ?

I was using 2.2.0.80 version.

Thanks

[epifan]

I've been trying out the wideband feature using an LM-1. I connected the LM-1 to the sensor on the car and used the serial cable to connect the LM-1 to the serial port on my laptop. I have the Tactrix cable connected to the OBD2 port and a usb on my laptop. I start the engine, switch on the LM-1 and open the logger. Connect to the ecu and then press Ctrl-P and I see the data in the min, max and current fields as expected.

I go to the menu and select Connect / External Sensors / Innovate SDK and the AFR field appears. I go into Configure Sensor and select the COM1 option (the only one available) and this gives me all the LM-1 channels. I click on LM1-O2 then click Apply. When I look at the data being captured my AFR fields all have a value of 4 in them. Am I doing something wrong or is this all the data it is supposed to show ? I know it doesn't write to the log as it's the trial version but shouldn't it display the same values as the LM-1 display ?

I was using 2.2.0.80 version.

Thanks

I have not tested ecuEdit with LM-1. Mine LC-1 have only 1 channel and work fine with it. I'm use Innovate SDK as described in docs and SDK examples.

1. Does your see correct AFR values in ecuEdit?
2. Then you choose different LM-1 channels AFR values are not change and equal "4"?

P.S. I'm try to find LM-1 owner and test it with ecuEdit

[swifty]

1. No, I haven't seen the correct afr in ecuedit. The value is always 4.

2. I have not tried other channels because none of them are connected to anything. I only have the LM-1 connected to the bosch sensor, I don't use it for logging anything else so that is the only channel that I expect to show data. I know the LM-1 and the channel is working ok because it works fine in Logworks.

[west_minist]

FOr me, my computer crashes when every it tries to get the channel.

I can read lc1 with its tools with no problems.

Error code 1000000a, parameter1 134782b2, parameter2 00000002, parameter3 00000000, parameter4 805001ad.

[epifan]

1. No, I haven't seen the correct afr in ecuedit. The value is always 4.

Please, try fixed version http://www.epifansoft.com/download/ecuedit_v2_2.exe

[JRSCCivic98]

Another bug. If you open a ROM and then open a table and change something in it... if you choose to close that table it'll ask you if you want to apply the changes before close. If you answer "no" it does not close the table. It only closes the table if you choose "yes" to apply the changes. Please fix it.

[epifan]

Another bug. If you open a ROM and then open a table and change something in it... if you choose to close that table it'll ask you if you want to apply the changes before close. If you answer "no" it does not close the table. It only closes the table if you choose "yes" to apply the changes. Please fix it.

fixed. http://www.epifansoft.com/download/ecuedit_v2_2.exe

[New2Scoobs]

is XMLWrite still required for this version or should ECUEdit be generating XML DEFS like enginuity seems to?

[epifan]

is XMLWrite still required for this version or should ECUEdit be generating XML DEFS like enginuity seems to?

Yes, XMLWrite is requred for generating new XML-descriptions. But I have some XML description database which are accessible for registered users.

[swifty]

epifan

Which other widebands do you plan on supporting in ecuEdit ?

thanks

[epifan]

Which other widebands do you plan on supporting in ecuEdit ?

We don't have any other widebands than from Innovate on our market I can define some interface for DLLs that can help to adding other widebands by other developers. Another option: someone send to me known wideband, I'm adding support and send it back...

[intrawrx]

tested with the LM-1 lastnight, it also gave me the number 4 in the field.

used the new fixed version too.

[epifan]

tested with the LM-1 lastnight, it also gave me the number 4 in the field.

I make debug tracer and send to you link to this version. You test it and send to me debug logs. I hope this help me to understand whats going on