Page 1 of 1

Problem connecting ECUflash to Subaru 2004 WRX

PostPosted: Sun Jul 08, 2007 8:20 am
by SPRITER1
Hi,
Don't know if anyone out there can help.

I'm trying to connect my laptop to the car and I get the following error;

[00:00:39.406] Version 1.30.1095
[00:00:39.421] 8 memory models read.
[00:00:41.765] 145 ROM metadata models read.
[00:00:41.765] checksum module "subarudbw" loaded.
[00:00:41.765] flashing tool "wrx02" loaded.
[00:00:41.765] flashing tool "wrx04" loaded.
[00:00:41.765] flashing tool "sti04" loaded.
[00:00:41.765] flashing tool "sti05" loaded.
[00:00:41.765] flashing tool "mitsukernel" loaded.
[00:00:41.765] flashing tool "mitsukernelocp" loaded.
[00:00:41.765] flashing tool "mitsubootloader" loaded.
[00:01:12.140] SSM2 init
[00:01:12.312] [FF] A2 10 0F 3D 44 58 30 05 73 FA EB 80 2B C3 02 AA
00 10 00 60 CE 54 FC B0 60 00 00 E0 00 00 00 00
00 DC 00 00 55 1F 00 00 02 02 00 00 00 00 00 E0
00 00 00 00 00 00 00 00
[00:01:12.312] SSM2 ECU ID is 3D 44 58 30 05
[00:01:12.312] SSM2 cmd_0x81

I had managed to connect to the car using my desktop about 6 months ago but that doesn't seem to work any more either.

Any ideas, could the communication interface on the ECU be knackered?!
Thanks......Steve