Problem connecting ECUflash to Subaru 2004 WRX
Posted: Sun Jul 08, 2007 8:20 am
Hi,
Don't know if anyone out there can help.
I'm trying to connect my laptop to the car and I get the following error;
[00:00:39.406] Version 1.30.1095
[00:00:39.421] 8 memory models read.
[00:00:41.765] 145 ROM metadata models read.
[00:00:41.765] checksum module "subarudbw" loaded.
[00:00:41.765] flashing tool "wrx02" loaded.
[00:00:41.765] flashing tool "wrx04" loaded.
[00:00:41.765] flashing tool "sti04" loaded.
[00:00:41.765] flashing tool "sti05" loaded.
[00:00:41.765] flashing tool "mitsukernel" loaded.
[00:00:41.765] flashing tool "mitsukernelocp" loaded.
[00:00:41.765] flashing tool "mitsubootloader" loaded.
[00:01:12.140] SSM2 init
[00:01:12.312] [FF] A2 10 0F 3D 44 58 30 05 73 FA EB 80 2B C3 02 AA
00 10 00 60 CE 54 FC B0 60 00 00 E0 00 00 00 00
00 DC 00 00 55 1F 00 00 02 02 00 00 00 00 00 E0
00 00 00 00 00 00 00 00
[00:01:12.312] SSM2 ECU ID is 3D 44 58 30 05
[00:01:12.312] SSM2 cmd_0x81
I had managed to connect to the car using my desktop about 6 months ago but that doesn't seem to work any more either.
Any ideas, could the communication interface on the ECU be knackered?!
Thanks......Steve
Don't know if anyone out there can help.
I'm trying to connect my laptop to the car and I get the following error;
[00:00:39.406] Version 1.30.1095
[00:00:39.421] 8 memory models read.
[00:00:41.765] 145 ROM metadata models read.
[00:00:41.765] checksum module "subarudbw" loaded.
[00:00:41.765] flashing tool "wrx02" loaded.
[00:00:41.765] flashing tool "wrx04" loaded.
[00:00:41.765] flashing tool "sti04" loaded.
[00:00:41.765] flashing tool "sti05" loaded.
[00:00:41.765] flashing tool "mitsukernel" loaded.
[00:00:41.765] flashing tool "mitsukernelocp" loaded.
[00:00:41.765] flashing tool "mitsubootloader" loaded.
[00:01:12.140] SSM2 init
[00:01:12.312] [FF] A2 10 0F 3D 44 58 30 05 73 FA EB 80 2B C3 02 AA
00 10 00 60 CE 54 FC B0 60 00 00 E0 00 00 00 00
00 DC 00 00 55 1F 00 00 02 02 00 00 00 00 00 E0
00 00 00 00 00 00 00 00
[00:01:12.312] SSM2 ECU ID is 3D 44 58 30 05
[00:01:12.312] SSM2 cmd_0x81
I had managed to connect to the car using my desktop about 6 months ago but that doesn't seem to work any more either.
Any ideas, could the communication interface on the ECU be knackered?!
Thanks......Steve