evo 6 problem

Developer topics relating to software that logs data from ECUs

Moderator: Freon

evo 6 problem

Postby moss99 » Wed Nov 08, 2006 9:07 am

Hi i have had a problem on my evo 6 for a while now where when i floor it from about 2.5 k i dont get a lot of acceleration but if i let off the throttle and floor it again it go,s as it should i have tried various things wastegate actuator dumpvalve coil packs plugs etc i now have evoscan and was wondering if someone could look at my log to see what they think it seems to be cutting the timing advance back to -5 when it does it (log attached below ...i hope) it happens 40seconds in 50 secs in and the worst time is 1min 3 secs in any help would be appreciated thanks..

ps i have blitz sonic air filter and evo 7 hard pipe kit 3" bore turbo back exhaust and ecutek remap to 343 hp it has done this before the mods but is now getting worse..
Attachments
EvoScanDataLog_2006.11.08_13.09.24.zip
(16.49 KiB) Downloaded 194 times
moss99
 
Posts: 4
Joined: Sat Nov 04, 2006 10:41 pm
Location: cornwall (U.K)

Return to Data Logging Software

Who is online

Users browsing this forum: No registered users and 1 guest

cron