ECU FLASH PROBLEM!

Developer topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

ECU FLASH PROBLEM!

Postby fotis_rs2 » Tue Aug 08, 2006 7:18 pm

during the installation i've got this...
Image


i also got the "error loading FTD2XX.DLL" message in the task info panel..


the program doesnt work and or can't open any hex or bin file...
ANY IDEAS? :cry: :cry: :cry:

note
my windows are not english
fotis_rs2
 
Posts: 16
Joined: Fri Jun 02, 2006 3:57 pm

Postby swifty » Wed Aug 09, 2006 12:34 am

change language settings to english and try reinstalling ?
swifty
 
Posts: 109
Joined: Wed Mar 22, 2006 3:01 am
Location: Behind a keyboard

Postby fotis_rs2 » Wed Aug 09, 2006 3:44 am

nop... i've done all the combinations possible with the language in regional settings menu...
fotis_rs2
 
Posts: 16
Joined: Fri Jun 02, 2006 3:57 pm

Postby NeverLies » Wed Aug 09, 2006 4:17 am

There is no problem with the language, you can install it on non US os. This message is mostly a warning.

When u say u can't open any rom, have u checked that your rom model have the corresponding XML file ? If not, you may use XMLWrite to generate one or check on this forum if someone has not already upload it.
NeverLies
 
Posts: 179
Joined: Tue Apr 12, 2005 1:49 am

Postby fotis_rs2 » Wed Aug 09, 2006 11:04 am

guys
i've install the same file (ecuflash) in 2 pcs....

the one with greek windows and the other with english...

in the one with the greek windows it's not working in the other it works just fine (no errors at all)...

i've uninstall and re-install it many times in both of them with the same results...
fotis_rs2
 
Posts: 16
Joined: Fri Jun 02, 2006 3:57 pm

Postby Ry-Guy » Sun Aug 20, 2006 2:28 am

i also got the "error loading FTD2XX.DLL" message in the task info panel..


I get the message as well. Any idea what's up with that? I can't seem to use 1.28 to dump my ECU image.

In fact when I load ECU Flash I seem to get a few problem messages:

[03:58:40.875] Version 1.28.716
[03:58:40.875] 8 memory models read.
[03:58:41.000] Unable to find parent metadata sti05base
[03:58:41.000] ROM metadata models A8DH200X.xml is invalid.
[03:58:41.000] 27 ROM metadata models read.
[03:58:41.000] checksum module "subarudbw" loaded.
[03:58:41.000] flashing tool "wrx02" loaded.
[03:58:41.000] flashing tool "wrx04" loaded.
[03:58:41.000] flashing tool "sti04" loaded.
[03:58:41.000] flashing tool "sti05" loaded.
[03:58:41.000] flashing tool "mitsukernel" loaded.
[03:58:41.000] flashing tool "mitsukernelocp" loaded.
[03:58:41.015] flashing tool "mitsubootloader" loaded.
[03:58:41.015] error loading FTD2XX.DLL


I've uninstalled and reinstalled but nothing changes. I can only use ECUexplorer to dump the ROM, and can't get ECU Flash to work.

****EDIT****

I'm retarded. ECUFlash defaults to COM3, but my cable is at COM4. :roll:
Last edited by Ry-Guy on Mon Aug 21, 2006 8:22 pm, edited 2 times in total.
Ry-Guy
 
Posts: 4
Joined: Sun Aug 07, 2005 12:58 am

Postby fotis_rs2 » Sun Aug 20, 2006 7:31 pm

as i notice this message apears when the installation of the openport cable is incomplete..
try to install the driver again and see if the pc identifies the cable when you connect it.
when the first conection is succesful the message will not apear again.. at least this is what hapend to me..in my new "american speaking" laptop..(in the other one that uses greek XP the problem could not be solved)
fotis_rs2
 
Posts: 16
Joined: Fri Jun 02, 2006 3:57 pm

Postby 4EVO2NV » Thu Sep 07, 2006 4:29 pm

to fix this error "error loading FTD2XX.DLL" You need to place the FTD2XX.DLL in your windows/system32 folder. The file can be found in the openecu/ecuflash/drivers. Hope that helps ya out.
4EVO2NV
 
Posts: 10
Joined: Thu Sep 07, 2006 4:25 pm

Postby Morfeus » Wed Sep 20, 2006 6:57 am

I tried to install of EcuFlash Ver.1.28.716 on my desktop
with XP (XP russion lenguage)
[my notebook has Windows 98 (for old auto-programms) and Windows 2000].
There were some problem and I think
that I won them. But I am uncertain whether I did all right:


1. When I was installing EcuFlash Ver.1.28.716 under XP (Rus)
I received DEVISE DRIVER INSTALLATION WIZARD worning ('!' in window):

'The current language is not supported by Devise Driver Installation Wizard
Contact the vendor that provided you this package.'

There was last string in EcuFlash Setup window:
'Execute "C:\Program Files\OpenEcu\EcuFlash\drivers\DPInst.exe'

2. When I was staring EcuFlash Ver.1.28.716 under XP (Rus) before installing
I received last record in 'Task Info' window of EcuFlash Ver.1.28.716:

'...
...
[07:04:33:188] error FTD2XX.DLL'

3. I copyed FTD2XX.DLL from
C:/.../EcuFlash/drivers/ to
C:/Windows/system32/.

4. Then I plugged OpenPort 1.2 (then 1.3) devises in USB
and pointed to pass C:/.../EcuFlash/drivers/ to install drivers
for Open Port 1.2 (then 1.3).

5. Before installations of drivers for OpenPort 1.2 (and 1.3)
I see 2 new records in Devise Manager:
- 'OpenPort 1.3 Mitsubishi';
- 'USB Serial Converter'.

6. When I started EcuFlash in Options > Port >
I have 2 new items too:
- 'OpenPort 1.3 Mitsubishi TX351G3a'
- 'COM19'

Is it all OK?

1. Can I try to reflesh something?
2. Can I install EcuFlash Ver.1.28.716 on Win2000 (Are there OpenPort1.2/1.3 - drivers for EcuFlash Ver.1.28.716 under Windows 2000?) ?
Morfeus
 
Posts: 24
Joined: Thu Mar 30, 2006 3:15 am
Location: UA


Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 6 guests

cron