Can`t read EVO5

Developer topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

Can`t read EVO5

Postby Falcon » Tue Jun 25, 2013 11:17 pm

Hi, all! Trying to read Evo5:

[20:26:19.843] using metadata XML ID read_evo5 from file C:/Program Files/OpenECU/EcuFlash/rommetadata/read templates/read_evo5.xml
[20:26:19.890] J2534 API Version: 04.04
[20:26:19.890] J2534 DLL Version: 1.00.3719 Dec 28 2012 23:38:48
[20:26:19.890] Device Firmware Version: 1.12.3688
[20:26:19.890] Device Serial Number: TAHhQTbe
[20:26:22.171] sending init sequence 2
[20:26:22.171] got 0x10 response instead of 0x11
[20:26:22.171] sending init sequence 3
[20:26:22.515] entering bootloader
[20:26:22.515] sending kernel size (2029)
[20:26:22.515] error sending kernel size
[20:26:22.515] interface close

They are reflashable as i know... or i mistake?
Falcon
 
Posts: 9
Joined: Wed May 26, 2010 11:07 am

Re: Can`t read EVO5

Postby ayashiko » Thu Jun 27, 2013 11:24 am

boot PIN, please make sure the voltage should be 16 - 18 volts
ayashiko
 
Posts: 15
Joined: Wed May 21, 2008 6:50 am

Re: Can`t read EVO5

Postby todd-w » Fri Jun 28, 2013 1:30 am

openport 2 ???
todd-w
 
Posts: 330
Joined: Tue Nov 14, 2006 3:01 pm
Location: Ireland

Re: Can`t read EVO5

Postby Falcon » Wed Jul 10, 2013 3:05 am

Sorry, for long response...
Yes i use OP 2.0.
Boot Pin must have 16-18V always?
Falcon
 
Posts: 9
Joined: Wed May 26, 2010 11:07 am

Re: Can`t read EVO5

Postby Sasha_A80 » Wed Jul 10, 2013 10:17 am

got 0x10 response instead of 0x11 - it's not H8/500 device

try mitsukernelocp
Sasha_A80
 
Posts: 102
Joined: Sun Aug 31, 2008 3:04 am
Location: Saratov, Russia

Re: Can`t read EVO5

Postby Falcon » Sun Jul 21, 2013 3:55 am

Didn't understand anything...
Falcon
 
Posts: 9
Joined: Wed May 26, 2010 11:07 am

Re: Can`t read EVO5

Postby todd-w » Thu Jul 25, 2013 2:13 pm

is it possible the ecu was changed for evo7/8 type ecu
todd-w
 
Posts: 330
Joined: Tue Nov 14, 2006 3:01 pm
Location: Ireland

Re: Can`t read EVO5

Postby Falcon » Fri Jul 26, 2013 4:07 am

No. There was the Evo4 Ecu before. Then it was replaced by Evo5 ecu
Falcon
 
Posts: 9
Joined: Wed May 26, 2010 11:07 am

Re: Can`t read EVO5

Postby todd-w » Sun Aug 04, 2013 4:53 am

try reading as evo6 tme 7203 or have a look see what the ecu board number is
todd-w
 
Posts: 330
Joined: Tue Nov 14, 2006 3:01 pm
Location: Ireland


Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 7 guests