Page 1 of 1

jdm v7 sti impreza not connecting

PostPosted: Wed Dec 12, 2012 1:56 am
by kiwi_fozze
ok, i'm running 64 bit windows 7, running 32 bit java, fresh install of everything.

brand spanking new tactrix cable, openport 2.0 revision E

car is a jdm sti v7 sportswagon, and here's the issues i'm having.

romraider learning view doesn't connect, heres the log:

[22:48:05.9745031] Learning View version 1.0 RC3

[22:48:08.3806408] PassThruOpen returned 0 and DeviceID 1
[22:48:08.3816408] PassThruReadVersion returned 0
[22:48:08.3816408] Device firmware version: 1.12.3681
[22:48:08.3816408] DLL version: 1.00.3147 Sep 3 2010 00:17:29
[22:48:08.3826409] API version: 04.04
[22:48:08.3866411] PassThruConnect returned 0 and ChannelID 3
[22:48:08.3906413] PassThruStartMsgFilter returned 0
[22:48:08.4006419] ECU Init
[22:48:08.4326437] PassThruWriteMsgs returned 0
[22:48:08.4336438] WRITE 6 bytes: 80 10 F0 01 BF 40
[22:48:10.4377584] PassThruReadMsgs returned 9
[22:48:10.4407586] PassThruGetLastError returned 9, Message: fewer messages were read than requested before timeout
[22:48:12.8108941] A read error has occured: PassThru Error
[22:48:12.8238949] PassThruDisconnect returned 0
[22:48:12.8278951] PassThruClose returned 0


ecuflash gives me the following:

[22:52:06.316] J2534 API Version: 04.04
[22:52:06.316] J2534 DLL Version: 1.00.3147 Sep 3 2010 00:11:07
[22:52:06.316] Device Firmware Version: 1.12.3681
[22:52:06.316] Device Serial Number: TA2H78GW
[22:52:09.906] denso02_bootloader_cmd_start
[22:52:10.220] writing kernel area addr: 020000 len: 0664
[22:52:12.139] kernel get version
[22:52:12.357] readback fail
[22:52:12.357] reading kernel comm buffer size
[22:52:12.367] readback mismatch
[22:52:12.568] reading kernel flash buffer size
[22:52:12.779] readback fail
[22:52:12.779] interface close
[22:52:12.795] interface close

many thanks for your help

Re: jdm v7 sti impreza not connecting

PostPosted: Sun Dec 16, 2012 10:01 pm
by kiwi_fozze
bump... anyone?