I recently upgraded to the beta version of ecuflash and it was working fine for me then I was having a communication issue with a car that ended up not having power at the obdII port. I was at first thinking there was something wrong with the beta so I un installed it and reinstalled the 1.42 once I did that my openport 2.0 will not work only my 1.3 cable. when I plug in the 1.3 cable it sees the new hardware and then has me do the installation of driver for vehicle interface, then once that is complete it then see the new hardware for openport 1.3 as serial port and has me install the drivers for that. all is goood. when I plug in the open port 2.0 it sees the new hardware for the vehicle interface and it has me install the drivers for it, then it never says that it sees openport 2.0 as a serial port. when I open ecuflash and have the 1.3 plugged in it sees the cable plugged in and will let me read write etc. with the 2.0 plugged in, it does not see it at all. I have since then uninstalled and reinstalled a half a dozen times, I have also tried going back to the beta software and it still will not complete the driver installation process for the 2.0. I am at a loss. I dont know what i am missing. can anyone please help? I dont know what else to try.
thanks-
bobby