AUD-Support of ECUflash ?

Developer topics relating to hardware that interfaces PCs to ECUs

Moderator: Freon

AUD-Support of ECUflash ?

Postby Jochen_145 » Sun Sep 30, 2012 12:45 am

Hey,

I found here in this forum and in other that ECUFlash should be able to support AUD-port readout (bit-bang-mode ?!)
with a spezial interface..

What´s about this ?
Is the support implementated in all ECUFlash versions or only in "special" ones ?
What kind of interface is needes, do someone got a wireing of it ?

How to activate the AUD-reading in ECUFlash and is it possible to scale the readout size ?

If ECUFlash is able to support AUD-readout, I thing it will be a big advantage to the SW.

Every hints to "easy-AUD-solutions" etc. are wellcome :!:

Jochen
Jochen_145
 
Posts: 70
Joined: Thu Nov 12, 2009 8:45 am

Re: AUD-Support of ECUflash ?

Postby Bruce Willis » Tue Oct 09, 2012 8:44 pm

I am interesting too
Bruce Willis
 
Posts: 58
Joined: Sat Jan 24, 2009 7:41 am
Location: Russia

Re: AUD-Support of ECUflash ?

Postby Jochen_145 » Sun Oct 14, 2012 2:11 am

found that bitbang-mode of FTDI chip makes it work as a 8bit bi directional bus.

So IMO it will work like the arduino- or propellor board solutions explained on active board
Jochen_145
 
Posts: 70
Joined: Thu Nov 12, 2009 8:45 am

Re: AUD-Support of ECUflash ?

Postby Sasha_A80 » Sun Oct 14, 2012 6:10 am

AUD mode is disabled at Subaru Denso ecu's.
That means this backdoor is locked.
Anyway you are welcome...
Sasha_A80
 
Posts: 102
Joined: Sun Aug 31, 2008 3:04 am
Location: Saratov, Russia

Re: AUD-Support of ECUflash ?

Postby Jochen_145 » Sun Oct 14, 2012 8:31 am

Sasha_A80 wrote:AUD mode is disabled at Subaru Denso ecu's.


Don´t know about that..
PIASINI and some other read via AUD the Subaru Denso ECUs.
Even china clone reads AUD, but not stable so you get a read-out wiht some crap values and so bad checksum
That means this backdoor is locked.

Maybe this is only on some special ECUs ?
Jochen_145
 
Posts: 70
Joined: Thu Nov 12, 2009 8:45 am

Re: AUD-Support of ECUflash ?

Postby Sasha_A80 » Sun Oct 14, 2012 8:55 am

Jochen_145 wrote:Maybe this is only on some special ECUs ?


It may be.
I personnally have not seen completely unlocked yet. Just analyze the code already uploaded.
Sasha_A80
 
Posts: 102
Joined: Sun Aug 31, 2008 3:04 am
Location: Saratov, Russia

Re: AUD-Support of ECUflash ?

Postby Jochen_145 » Sun Oct 14, 2012 9:00 am

Piasini needs a bridge between a connection, with I just know by picture and GND.

Without this bridge, the read-out will not work.
Maybe this "short circle" the locked backdoor ?
Jochen_145
 
Posts: 70
Joined: Thu Nov 12, 2009 8:45 am

Re: AUD-Support of ECUflash ?

Postby Bruce Willis » Sun Oct 14, 2012 7:41 pm

Sasha_A80 wrote:AUD mode is disabled at Subaru Denso ecu's.
That means this backdoor is locked.
Anyway you are welcome...

У тебя осталась картинка ЭБУ, который был залочен? Мне еще не один блок не попадался залоченный.
Bruce Willis
 
Posts: 58
Joined: Sat Jan 24, 2009 7:41 am
Location: Russia

Re: AUD-Support of ECUflash ?

Postby Sasha_A80 » Sun Oct 14, 2012 9:11 pm

Bruce Willis wrote:
Sasha_A80 wrote:AUD mode is disabled at Subaru Denso ecu's.
That means this backdoor is locked.
Anyway you are welcome...

Do you have any pictures of the ecu locked?
I have not seen any locked yet.


MY04 JDM Legacy dual AVCS ecu. I suspect ADM dual AVCS versions use the same code.

Just analize or download the code into any SH7055 ecu.
Have fun.

AUD readable after being enabled inside the code.
Attachments
A2ZJ600B_A2100F_2F04785006.bin
ROM image
(512 KiB) Downloaded 1003 times
JDM_LGT_MY04.JPG
JDM Legacy GT dual AVCS ecu
JDM_LGT_MY04.JPG (210.27 KiB) Viewed 11810 times
Sasha_A80
 
Posts: 102
Joined: Sun Aug 31, 2008 3:04 am
Location: Saratov, Russia


Return to Interface Hardware

Who is online

Users browsing this forum: No registered users and 9 guests

cron