Page 37 of 39
Re: Openport Stand-Alone Logging Beta
Posted:
Fri Nov 05, 2010 11:24 am
by mohammadov
Please help me logging LC-1!!
on ecuflash 1.42 and firmware 1.11.2720 i was logging lc-1 successfuly.
but with the new ecuflash and the new firmware for openport am not lucky at all.
the result for lc-1 is always 0's
i tried:
type = inno
paramname = mylc1.afr
paramid = 0x0101
scalingrpn = x,14.7,*
and this:
type = inno
paramname = mylc1.afr
paramid = 0x0101
scalingrpn = mylc1.afr,14.7,*
and this:
type = inno
paramname = mylc1.lambda
and this:
type = inno
paramname = mylc1.afr
paramid = 0x0101
scalingrpn = 10000
all results was zeros 0!
i rechecked my cables and everything seems fine,also the innovate gauge i have is showing numbers.
so whats the problem here???my ecu is 03 JDM STI
and thaanks
Re: Openport Stand-Alone Logging Beta
Posted:
Mon Nov 08, 2010 9:19 pm
by earlyapex
Colby,
Any chance to get Evo 10 CAN channel logging support with this?
Example:
SST Transmission Temp
CAN28-0
- Bryan
Re: Openport Stand-Alone Logging Beta
Posted:
Mon Nov 08, 2010 9:22 pm
by Tephra
yeah he is working on it already
once he gives me test firmware ill do up a config file for u
Re: Openport Stand-Alone Logging Beta
Posted:
Mon Nov 08, 2010 9:28 pm
by earlyapex
Tephra wrote:yeah he is working on it already
once he gives me test firmware ill do up a config file for u
Woohoo!
- Bryan
Re: Openport Stand-Alone Logging Beta
Posted:
Sun Nov 28, 2010 9:14 am
by GBorrelli
I'm sorta new to this whole stand alone data logging thing. I love the idea and I've gotten a decent logcfg setup. However, there are a few things I still haven't been able to figure out. Is there a way to have spaces instead of underscores in the paramname so that I can just click grab headers in AirBoy's spreadsheet instead of manually having to choose them all the time? Has anyone gotten the dyno macro to work properly? I think the problem lies with the units I'm using for time. The macro is saying they're milliseconds, but t's been reporting my car as having about 84 Hp
which I'm pretty sure is wrong... Lastly, has anyone gotten a PLX SM-AFR to work with the stand alone?
Re: Openport Stand-Alone Logging Beta
Posted:
Fri Dec 03, 2010 9:14 am
by fostytou
fostytou wrote:Harlech wrote:Am I missing something or what? I have added the "paramname = inno.afr" to my LogCFG and all I get is 4's from my LC-1 when I log, I can't seem to find a definitive answer to this and it is rather frustrating.
Yeah, I'm still stuck with getting that to work on the UEGO and I don't know why. It would really be helpful. Firmware is up to date also. Maybe your problem is the same as mine....
I've quadruple checked the cable I built every way possible and it is still correct. I'm not sure if its a CAN problem or something else strange.
Issue SOLVED! I had foolishly placed the AEM logging item at the end of the config file. Once moved up to the group with the other logged items above the stop/start conditions all was well!
Re: Openport Stand-Alone Logging Beta
Posted:
Sat Dec 04, 2010 5:54 pm
by mfb
Can you post your logcfg just to be sure I know where to put it?
Im just about to have my aem hooked up next week and will be using what you've shared here as resource. Thanks for updating us!
Re: Openport Stand-Alone Logging Beta
Posted:
Mon Dec 06, 2010 11:40 pm
by xdeathwishx
So I just started to try and do standalone logging but I'm having trouble. When I plug my SD card into the OP2 while the OP2 is plugged into the PC, the external drive shows up but when I try opening it, it says the disk is not formatted. If I try to format it while it is plugged into the OP2, it hangs for a while and eventually says that the disk cannot be formatted. I plugged the card into my card reader and formatted it in FAT32 but the OP2 still seems to think it's not formatted. One thing I notice is that the card doesn't seem to snap into place in my OP2. It sticks out a bit, and if I push it in, it's spring loaded and just pops back out a bit. It is flashing blue and red lights when plugged into the PC though.
I loaded a logcfg.txt file onto it via my card reader and put it in the OP2 to try and log with it anyway, but it didn't write anything to the card.
I have an '02 bugeye WRX. Any ideas?
Re: Openport Stand-Alone Logging Beta
Posted:
Tue Dec 07, 2010 12:01 am
by xdeathwishx
Nevermind. I wrestled with it some more, and it turns out I just didn't have the card all the way in. You really have to fight with it to get it to stay. I think I'm just going to permanently leave it in there from now on.
Re: Openport Stand-Alone Logging Beta
Posted:
Tue Dec 07, 2010 4:49 pm
by ishy
I can't get my LC-1 to work and I'm 99% sure this is because the OP is using 9,600 baud for the LC-1, but the LC-1 is actually 19,200. If I send fake data to the OP at 9,600 the light flashes, but if I send real or fake data at 19,200, no flashing.
Does anyone actually have the LC-1 working with the latest OP firmware?
Re: Openport Stand-Alone Logging Beta
Posted:
Tue Dec 07, 2010 5:32 pm
by ishy
Ok, this appears to be frustratingly simple.
Under "type=inno"
put "baud=19200"
I assume this would also allow you to use the ASCII type at a speed besides 9600 as well.
Re: Openport Stand-Alone Logging Beta
Posted:
Fri Dec 10, 2010 12:01 pm
by ishy
While the baud=19200 does seem to change the baud rate, I still can't log my LC-1, I just get zeros.
Re: Openport Stand-Alone Logging Beta
Posted:
Tue Dec 14, 2010 8:11 am
by fostytou
ishy wrote:While the baud=19200 does seem to change the baud rate, I still can't log my LC-1, I just get zeros.
See my post above. Make sure it is above the stop/start condition items and grouped with the other logging items.
I'll try to post a copy of my config file soon. I need to start aggregating all of these awesome logs I'm collecting!
Re: Openport Stand-Alone Logging Beta
Posted:
Tue Dec 14, 2010 9:26 pm
by fostytou
mfb wrote:Can you post your logcfg just to be sure I know where to put it?
Im just about to have my aem hooked up next week and will be using what you've shared here as resource. Thanks for updating us!
Here is my Solid, working evo X mode23 logcfg with various start/stop options and extra logging parameters including AEM serial
http://thefrost.net/randomfiles/tuning/ ... logcfg.txt
Re: Openport Stand-Alone Logging Beta
Posted:
Wed Dec 15, 2010 1:57 am
by volik8
Good afternoon. The help is necessary to me
The question - can be made logcfg.txt which to write down on SD the card in OP2 all process of record in ECU and so copy ROM. I need to crack it ECU hitachi