- Code: Select all
Code:
conditionrpn = CruiseLight,1,==,&&,RPM,2500,>
action = start
conditionrpn = CruiseLight,0,==,||,RPM,2500,<
action = stop
; only log when the engine is running
;conditionrpn = RPM,0,>
;action = start
;
;conditionrpn = RPM,0,==
;action = stop
; start logging to a new file when the throttle goes from previously below 80 to above 80
; #throttle refers to the previous throttle sample
conditionrpn = TPS,80,>,#TPS,80,<=,&&
action = newfile
I'm not sure if it should be this based on the way the other operators are set up:
- Code: Select all
Code:
conditionrpn = CruiseLight,1,==,RPM,2500,>,&&
action = start
conditionrpn = CruiseLight,0,==,RPM,2500,<,||
action = stop