I am looking for some help generating my logcfg.txt file.
Car is 2011 USDM WRX STi 5 door
ECUID : AE5IB00V. Although, The rom currently flashed on the car may be the sedan rom. I plan on copying my tune back to the correct rom for the car, even though they both work just as expected.
I have this so far
- Code: Select all
Code:
type=ssmk
paramname = Coolant
paramid = 0x000008
databits = 8
scalingrpn = x,40,-
paramname = A/F_Correction_#1(%)
paramid = 0x000009
databits = 8
scalingrpn = x,128,-,100,*,128,/
paramname = A/F_Learning_#1(%)
paramid = 0x00000A
databits = 8
scalingrpn = x,128,-,100,*,128,/
paramname = RPM
paramid = 0x00000E
databits = 16
scalingrpn = x,0.25,*
sampinterval = 5
paramname = Throttle Opening(%)
paramid = 0x000015
databits = 8
scalingrpn = x,0.3921569,*
paramname = A/F_Sensor_#1(AFR)
paramid = 0x000046
databits = 8
scalingrpn = x,128,/,14.7,*
paramname = CL/OL_Fueling*(status)
paramid = 0xFFA44D
databits = 8
scalingrpn = x,6,+
paramname = MAFG/s
paramid = 0x000013
databits = 16
scalingrpn = x,0.01,*
sampinterval = 2
paramname = MAFv
paramid = 0x00001D
databits = 8
scalingrpn = x,0.02,*
paramname = EngineLoad
paramid = 0x000007
databits = 8
scalingrpn = x,100,*,255,/
paramname = Manifold_Absolute_Pressure
paramid = 0xFF6394
isfloat = 1
scalingrpn = x,0.01933677,*
paramname = IPW ; injector #1 pulse width
paramid = 0x000011
scalingrpn = x,0.256,*
paramname = Knock_Sum*(count)
paramid = 0xFF7FEC
databits = 8
scalingrpn = x
conditionrpn = Coolant,76,>
action = start
conditionrpn = RPM,0,==
action = stop
Everything works except engine load, and CL/OL status. I am questioning MAFv but that may just be a resolution issue(numbers seem a little high for just cruising but the car is new to me so I have yet to really determine *normal numbers) . The issues with CL/OL status and engine load seem to either be incorrect scaling or incorrect paramid. Ive scoured the internet looking to correct these two params with limited success. I was able to fix many of the parameters I was targeting. (I am working on the GR stumble fix. I have a very slight stumble in the 28-3200 rpm range. Doesnt even happen very often. But I would like to smooth it out with the compensation tables for such issue.)
Any help would be appreciated. I tried pulling the data out of my logging xml file. But the values werent coming back scaled properly....